If 1:1 compliance with the L 182/19-standard is desired, measurements according to the standard and an adap- tation to the output of the DOL 16 sensor with the chosen placement must be carried out. www.dol-sensors.com DOL 16 0- 100/ 50 LUX 0-10V...
• High-pressure cleaning with hot water • Highly compressed air • Solvents • Corrosive/caustic agents Do not bend the sensor as this would inflict permanent damage on the electronics of the sensor. www.dol-sensors.com DOL 16 0- 100/ 50 LUX 0-10V...
Max. Cable length at 1.50 mm Shipping weight g (oz) 150 (5.3) Measurement, ship- mm (inch) 275 x 200 x 20 (11 x 8 x 0.8) ment 7.1 Dimensioned sketch Dimensions In mm (inch). www.dol-sensors.com DOL 16 0- 100/ 50 LUX 0-10V...
Need help?
Do you have a question about the DOL 16 0- 100/ 50 LUX 0-10V and is the answer not in the manual?
Questions and answers