Subscribe to Our Youtube Channel
Related Manuals for Loctite EQ HM24 050
Summary of Contents for Loctite EQ HM24 050
- Page 1 EQUIPMENT Operation Manual Loctite EQ HM24 050 Hot Melt Dispenser Part Number 2557727...
-
Page 2: Safety Instructions
3. Insert a Loctite® hot melt adhesive stick into the rear of the tool. Push the stick forward until slight resistance is felt. -
Page 4: Preventative Maintenance
• Foam materials, like polystyrene, can be easily bonded to other surfaces. However, the adhesive must be applied to the other surfaces, not to the foam. • Use only genuine Loctite® hot melt adhesive sticks to ensure reliable performance. Loctite® hot melt adhesive sticks are non-toxic and non-flammable. -
Page 5: Replacing The Nozzle
Replace the rubber safety cover. Servicing and Repairs The Loctite® Hot Melt Dispenser contains no user-serviceable parts other than the nozzle. In order to avoid a hazard, any servicing or repairs, including replacement of the supply cord, should only be carried out by the manufacturer, its service agent, or other similarly qualified person. -
Page 6: Warranty
Warranty Henkel Corporation expressly warrants that all products referred to in this Instruction Manual for the 2557727 EQ HM24 050 Dispenser (hereafter called “Products”) shall be free from defects in materials and Loctite® workmanship. Liability for Henkel shall be limited, as its option, to replacing those Products which are shown to be defective in either materials or workmanship or to credit the purchaser the amount of the purchase price thereof (plus freight and insurance charges paid therefore by the user).
Need help?
Do you have a question about the EQ HM24 050 and is the answer not in the manual?
Questions and answers