To Assemble:
Insert casters into sockets on bottom of canister. Push casters until seated. Attach hose to coupling
on front of can.
To Connect Hose:
top of the hose inlet, and remove hose.
To Operate:
(
1) For Dry Pickup Only:
Install paper bag on inlet inside of tank. Insert the cloth lter assembly in the top of the tank. Install motor
head. The cloth lter located inside the can provides highly e cient separation of dust and dirt particles
from the incoming air stream.
(2) For Wet Pickup Only:
IMPORTANT: The wet shut o adapter must be installed prior to picking up liquids. To install, remove
motor head, HEPA lter and disposable paper lter bag. Insert the wet shut o adapter into the tank, mak-
ing sure that the top lip of the adapter is rmly seated on the top of the tank. Insert the HEPA lter inside
the adapter, checking again that the lip of the HEPA lter is rmly seated to the lip of the adapter. Replace
motor head and close locking clamps.
To Maintain:
This vacuum cleaner contains no user serviceable parts. If repair is needed, please take the vacuum
cleaner to an authorized Sterling factory service center.
CAUTION
Always operate vacuum with the HEPA lter properly installed and in good condition.
CAUTION
Do not use this vacuum to pick up hazardous materials without HEPA lter being installed.
CAUTION
Never lubricate the vacuum cleaner motor. The motor bearings are permanently sealed. This vacuum is
intended for indoor or outdoor use and for wet pickup, however, it is not intended to be exposed to rain.
HEPAPro 20 Vacuum
Thank you for your recent Sterling purchase. You have bought a high quality, long-
life commercial vacuum cleaner. For your safety and continued satisfaction with
this product, please read this owner's manual carefully before using. For your infor-
mation, all parts used in the manufacturing of this vacuum cleaner meet or exceed
rigid quality control standards. We stand behind all our products and are available
to assist you with a knowledgeable and dedicated sta . If we can help you in any
way, please call Customer Service at 844-822-7787.
We also recommend that you visit our website www.sterlingna.com for the fastest
most e cient way to complete your product registration and see other Sterling
products and accessories to meet your cleaning needs.
Insert the hose end into the tank inlet until it clicks. To remove the hose, press the button on
Need help?
Do you have a question about the HEPAPro 20 and is the answer not in the manual?
Questions and answers