Related Manuals for Antigravity Batteries HEAVY DUTY Series
Summary of Contents for Antigravity Batteries HEAVY DUTY Series
- Page 1 ANTIGRA VITY BA TTERIES HEA VY DUTY A TX-20/30-HD USER MANUAL FOR MOTORCYCLE/POWERSPORT “HD" MODELS...
-
Page 2: Table Of Contents
A TX-20/30-HD USER MANUAL CONTENTS INTRODUCTION SAFETY WARNINGS IN THE BOX PRODUCT SPECS BATTERY CARE & MAINTENANCE THE STATUS BUTTON STORAGE MODE CHOOSING A CHARGER CHARGING INSTALLATION TROUBLESHOOTING WARRANTY CONTACT INFO NOTE: Lithium-Ion has different maintenance procedures than Lead/Acid batteries! READ THIS MANUAL! DANGER - WARNING! PRIOR TO USE, READ AND UNDERSTAND THIS MANUAL AND SAFETY INFORMATION. -
Page 3: Introduction
Introduction THANK YOU Thank you for purchasing Antigravity Batteries high performance “Heavy Duty” (HD) LITHIUM Starter Battery. This battery represents the latest in Lithium-Ion Technology and offers better starting performance, longer service life as well as incredible weight reduction over comparable Lead/Acid Batteries. - Page 4 A TX-20/30-HD USER MANUAL IMPORTANT! READ FIRST! DANGER! READ AND FULLY UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT. Failure to follow these safety instructions may result in ELECTRICAL SHOCK, EXPLOSION, or FIRE, which may result in a SERIOUS INJURY, DEATH, or PROPERTY DAMAGE. Shock.
-
Page 5: Safety Warnings
MODIFICATIONS TO THE PRODUCT WILL VOID YOUR WARRANTY. ACCESSORIES This product is only approved for use with Antigravity Batteries approved accessories. Antigravity Batteries is not responsible for user safety or damage when using accessories not approved by Antigravity Batteries. INST ALLA TION Make sure product is installed correctly. - Page 6 Always take used batteries to your local battery recycling center. If the battery is excessively hot, emitting odor, deformed, cut, broken, or is demonstrating an abnormal occurrence, immediately stop all use and contact Antigravity Batteries (email info@antigravitybatteries.com or call 310 527-2330). BA TTERY CHARGING Use ONLY approved Chargers specifically for 12.8v LiFePO4 (Lithium-Iron Phosphate) chemistries with this battery.
-
Page 7: In The Box
A TX-20/30-HD USER MANUAL In the Box 1 pc- Antigravity HEAVY DUTY (HD) Battery (operation will be the same for ATX20-HD and ATX30-HD) 1 set- Terminal Hardware 1 set- Foam or Plastic Spacers Specifications BATTERY TYPE: Lithium Iron-Phosphate (LiFePo4) VOLTAGE: 12.8V (nominal) CAPACITY: Check label on the battery for Amp Hours CRANKING AMPS: Check label on the battery DIMENSIONS: Varies per model... -
Page 8: Battery Care & Maintenance
CHECKING THE BA TTERY Antigravity Batteries do not require maintenance if they are kept in a good state of charge (13.2v), but as with any battery, they should be checked every few months as a precaution. Visually inspect the battery for cracks, check the mounting and cables are secure and check the voltage. -
Page 9: The Status Button
A TX-20/30-HD USER MANUAL The Status Button IMPORT ANT PLEASE NOTE: PLEASE NOTE: The automatic Sleep Mode protection feature is designed for emergency uses when your battery is over-discharged. It does NOT take the place of proper battery or vehicle maintenance. You still need to maintain this battery in a good state of charge and keep it on a charger if you are not riding often enough to charge the battery, or if your vehicle has a large Parasitic Drain from accessories that drain the battery quickly. -
Page 10: Storage Mode
A TX-20/30-HD USER MANUAL Storage Mode OVERVIEW The Antigravity Battery can hold a charge for roughly 10~12 months if not connected to anything. If connected to the vehicle, the length of time it can stay charged is fully dependent on Amp Hours of the battery (smaller batteries have less capacity and will drain faster);... -
Page 11: Charging
Charging TO CHARGE/MAINT AIN YOUR ANTIGRA VITY HD BA TTERY Antigravity Batteries operate and are recharged correctly with any STOCK/OEM STANDARD CHARGING SYSTEM found in modern 12-volt Motorcycle/Powersports vehicles. Under normal operating conditions, and if you are riding/ driving enough to keep the battery charged, the Antigravity Battery should rarely need to be charged. The minimum “State of Charge”... -
Page 12: Installation
3. Test fit your Antigravity Battery into place. Check for proper fitment, and make sure wires are free from hazards. Please note: Antigravity Batteries are designed to replace standard sizes of Lead/Acid Batteries, but there may be some minor variations in height or fitment. Use the provided plastic/foam blocks to raise or fill in any extra space if necessary. -
Page 13: Troubleshooting
Status Button on the battery for 2-3 seconds to “awaken” the battery, and connect the charger. Now the Charger will be able to “see” the battery and begin to charge it. The Antigravity Batteries “SUPER-CHARGER” has a built- in BMS RESET feature so you do not need to awaken the battery by pressing the Status Button. -
Page 14: Warranty
For full Warranty terms and information visit our Warranty page: https://antigravitybatteries.com/warranty/ Antigravity Batteries LLC warrants to the original purchaser that our batteries are free of defects in material and workmanship for the Prorated term of 3 years in stock vehicles using OEM standard charging systems. Race use and Total-Loss Systems are not covered. -
Page 15: Contact Info
The prorated discount toward the purchase of a new battery will be applied. Antigravity Batteries LLC reserves the right to deny any and all claims if all conditions and terms are not met.
Need help?
Do you have a question about the HEAVY DUTY Series and is the answer not in the manual?
Questions and answers