96
Chapter 14: Mixer
Saving the setting of Input Thru
You can save the setting of the Input Thru as the separate file
independent from the Program or Sequence file.
If you save the internal memory data using "SAVE ENTIRE
MEMORY", the Input thru file will be saved with the Project file.
The Input Thru setting is contained in an Input Thru file.
When you load the Project file, the Input Thru file will be loaded
automatically along with the Project file. You can also load only
the Input Thru file. The Input Thru file (.IPT file) is saved as the
file with IPT – and the project name.
MPC2500 Operator's Manual rev 1.0