Setting The Midi Input - Akai MPC1000 Operator's Manual

OMNI- A
OMNI- B
OMNI- AB

Setting the MIDI input

Normally, the MPC1000 can receive the incoming MIDI data regardless of the MIDI channel, so you do not have to
worry about the MIDI channel of the connected MIDI devices. You can change the setting to receive only the data
on a specific MIDI channel.
0 1 . S e l e c t t h e M I D I / S Y N C mode b y pressing t h e [ M O D E ] k e y and hitting t h e [PAD 9 ]
( M I D I / S Y N C ) .
0 2 . P r e s s t h e [ F 1 ] ( M I D I ) k e y .
The MIDI page will be displayed.
0 3 . S e l e c t t h e A c t i v e t r a c k r e c e i v e channel field and s e l e c t t h e M I D I channel from which
you wish to receive the data.
If you set this field to ALL, the MPC1000 will receive all channels. If you select any channel from 1 to 15, the
MPC1000 will receive only the selected channel.
The MPC1000 will output the incoming MIDI data as it is from MIDI OUT A.
The MPC1000 will output the incoming MIDI data as it is from MIDI OUT B.
The MPC1000 will output the incoming MIDI data as it is from both MIDI OUT A and B.
Using the MPC1000 with external devices
-47-