Subscribe to Our Youtube Channel
Related Manuals for D-Link DP-313
Summary of Contents for D-Link DP-313
- Page 1 DP-313 Wireless Print Server Web Configuration User’s Manual Rev.01 (August, 2001) Made In Taiwan RECYCLABLE...
-
Page 2: Table Of Contents
Table of Contents Web Configuration........3 Configuring the Print Server ..... 4 Management ..........5 ................5 YSTEM TATUS ................6 RINTER TATUS Configuration ..........7 ................7 ERVER EVICE TCP/IP P ...............8 ROTOCOL BEUI P ..............9 ROTOCOL ..............10 PPLE ROTOCOL Tools ............11 .................11 RINT ..................12... -
Page 3: Web Configuration
Web Configuration This manual describes the use of the Web Configuration for controlling and configuring print servers. -
Page 4: Configuring The Print Server
Configuring the Print Server Open web browser and type http://192.168.0.1 in the address box. The number is the default IP address of your print server. Press Enter. Note:- The PC’s IP address must correspond with the print server’s IP address in the same segment for the two devices to communicate. The print server’s welcome screen will appear. -
Page 5: Management
Management Click on “Management” in the systems tool bar and in the Management Table it provides information on the print server’s Systems Status and Printer Status. System Status Click on “System Status” in the Management Table. The page will appear as below providing general information regarding the print server. -
Page 6: Printer Status
Printer Status Click on “Printer Status” in the Management Table. The page will appear as below providing general information regarding the printer status. For most updated information click on the “Refresh” button. Once the print server is connected to a printer the Printer Status will show Online. -
Page 7: Configuration
Configuration Click on “Configuration” in the systems tool bar and in the Configuration Table it provides settings to configure the print server for the Server Device, TCP/IP Protocol, NetBEUI Protocol and AppleTalk Protocol. Server Device Click on “Server Device” in the Configuration Table. The page will appear as below providing the settings required to configure the print server. -
Page 8: Tcp/Ip Protocol
TCP/IP Protocol Click on “TCP/IP Protocol” in the Configuration Table. The page will appear as below providing the settings required to configure the print server. Click the “Save” button to ensure the settings are saved and updated. -
Page 9: Netbeui Protocol
NetBEUI Protocol Click on “NetBEUI Protocol” in the Configuration Table. The page will appear as below providing the settings required to configure the print server. Click the “Save” button to ensure the settings are saved and updated. -
Page 10: Appletalk Protocol
AppleTalk Protocol Click on “AppleTalk Protocol” in the Configuration Table. The page will appear as below providing the settings required to configure the print server. Click the “Save” button to ensure the settings are saved and updated. -
Page 11: Tools
Tools Click on “Tools” in the systems tool bar and in the Tools Table it provides information for Print Test, Reset, and Factory Reset. Print Test Click on “Print Test” in the Tools Table. The page will appear as below and click the “Test” button to begin printer printing test. -
Page 12: Reset
Reset Click on “Reset” in the Tools Table. The page will appear as below and click the “Yes” button to activate the reset procedure. -
Page 13: Factory Reset
Factory Reset Click on “Factory Reset” in the Tools Table. The page will appear as below and click the “Yes” button to activate the factory reset procedure. -
Page 14: Help
Help Click on “Help” in the systems tool bar and in the Help Table it provides general information about the print server. About Click on “About” in the Help Table. The page will appear as below providing general information about the print server. -
Page 15: Limited Warranty
(90) days after any repaired or replaced Hardware i s delivered. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D -Link upon return to D -Link of the defective Hardware. - Page 16 The packaged product shall be insured and shipped to D-Link, 53 Discovery Drive, Irvine CA 92618, with all shipping costs prepaid. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package.
- Page 17 PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.
-
Page 18: Offices
TEL: 39 -02-2900-0676 FAX: 39 -02-2900 -1723 URL: www.dlink.it E-MAIL: info@dlink.it JAPAN D-LINK JAPAN 10F, 8 -8-15 Nishi-Gotanda, Shinagawa -ku, Tokyo 141 Japan TEL: 81 -3-5434 -9678 FAX: 81-3-5434-9868 URL: www.d-link.co.jp RUSSIA D-LINK RUSSIA Michurinski Prospekt 49, 117607 Moscow, Russia TEL: 7-095 -737-3389, 7-095-737 -3492 FAX: 7 -095-737-3390... -
Page 19: Registration Card
8. What category best describes your company? oAerospace oEngineering oEducation oFinance oHospital oLegal oInsurance/Real Estate oManufacturing oRetail/Chainstore/Wholesale o Government oTransportation/Utilities/Communication oVAR oSystem house/company oOther________________________________ 9. Would you recommend your D-Link product to a friend? oYes oNo oDon't know yet 10.Your comments regarding this product? __________________________________________________________________________________________...
Need help?
Do you have a question about the DP-313 and is the answer not in the manual?
Questions and answers