Connecting The Camera And Printer - AgfaPhoto Selecta 16 User Manual

Connecting the camera and printer.

1. Make sure both the camera and prnter are turned on.
2. Connect one end of the suppled USB cable to the USB
port on your camera.
3. Connect the other end of the cable to the USB port on
the prnter.
If the camera s not connected to a PctBrdge compatble
prnter, the followng error message wll appear on the LCD
screen.
The above error message would also appear f the
USB mode were set ncorrectly, n whch case you
should dsconnect the USB cable, check the USB
mode settngs, ensure that the Prnter s turned on,
and then try connectng the USB cable agan.
AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16
73 73