ConnectNg To A PCtbrDge CompatBle PrNter; SettNg The Usb Mode - AgfaPhoto Selecta 16 User Manual

AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16

Connectng to a PctBrdge Compatble Prnter

PctBrdge allows prntng mages from a
memory card n a dgtal camera drectly to a
prnter, regardless of brand. To find out f a
prnter s PctBrdge compatble, smply look
for the PctBrdge logo on the packagng or
check the manual for specficatons. Wth
the PctBrdge functon on your camera, you can prnt the
captured photos drectly to a PctBrdge compatble prnter
usng the suppled USB cable, wthout the need for a PC.
Setting the USB mode
Snce the camera's USB port can be set to connect wth
ether a PC or a Prnter, the followng steps wll ensure
that the camera s correctly configured to connect wth a
Prnter.
1. Go to the camera's Transmsson menu and, select USB
connecton wth the Up/Down button, then press the
Rght button.
2. Use the Up/Down button and select Prnter.
72
3. Press the button to confirm the settng.
After the camera s reset, t wll swtch to PC mode
automatcally from USB mode.