Homebase 7ft MICHIGAN PINE ARTIFICIAL TREE Instruction Manual page 3

Assembly
Step 1
4
5
Open up the metal tree stand (4)
and lock in the screw (5).
Care and use
Before using or re-using the tree, inspect the product carefully. If there are any damaged parts or exposed sharp points,
please dispose of the tree.
Disassembly and storage
1. Remove all decorations.
2. Disassemble the tree from the top to the bottom.
Start with the 'tree top' and gently lift straight up to remove it from the section below, then fold all branches toward the pole.
3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in both
directions. Lift the upper pole up again.
4. Continue by gently lifting each section(s) straight up from the section below and fold all branches toward the pole, until the bottom
section is removed from the tree stand.
5. Carefully place all tree sections into the box and tape it shut.
6. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity may
damage your tree.
Step 2
Insert the bottom tree section (3)
into the stand first, then tighten the
screw (5). Then insert the middle and
top tree sections (1 & 2).
3
Step 3
1
2
3
Assembly complete
To shape your tree, pull down
the tree tips and adjust the
branches to fill any gaps.