Homebase 7ft MICHIGAN PINE ARTIFICIAL TREE Instruction Manual page 2

Caution
• This tree is intended for INDOOR USE ONLY.
• Do not position or place the tree near fire, candles or any other direct sources of heat. Avoid using in damp, wet and humid areas.
• Do not position your tree where it is a hazard to the elderly, children or pets. Take particular care with electric cables.
• This product is for decoration purposes only. Trees have small parts which may pose a choking hazard if detached from the branches.
Not to be used by children as a toy. Keep out of reach of children and pets.
• Place on a level, hard and flat surface. Do not place where tree is likely to wobble due to an uneven surface, floors or thick carpeting.
• Ensure tree sections are stable and securely attached to the top of your tree.
• After assembling the tree and adding decorations, make sure the tree is stable. If the tree is not stable, shift the weight of the
decorations and use support wires to attach to walls and/or window frames (make sure they are secure also).
• Do not overload with heavy decorations.
• Please check all fittings and re-tighten on a weekly basis, or as necessary.
• When you have finished using the tree, carefully re-pack following the instructions to ensure the tree remains in a good condition to be re-used.
Make sure the storage area is dry, avoid any damp, wet and humid areas.
• Retain assembly instructions for future use.
Before you start
1. Please check that all parts are present before you start the assembly of your product, as once assembled, this product is exempt from our
money back guarantee. This does not affect your statutory rights.
2. For ease and speed of assembly, we recommend that before you commence each step, you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the flat area in which they will be placed in use, to avoid moving the
product unnecessarily, once assembled. Never allow any part of the set to come into contact with a source of heat or flames.
5. Please keep plastic bags out of reach of children and animals.
6. Locate your tree on a level surface that will not be damaged by the tree or decorations that could detach.
7. During assembly please take care not to over-tighten any fittings, as this may damage the product.
Assembled dimensions
1070mm
Parts list
No. Parts List
1. Top section of tree
Middle section of tree
2.
3. Bottom section of tree
4. Metal tree stand
5. Screw
2
1
2
5
3
4
Qty
1
1
1
1
1