Advertisement
www.reersafety.com
This symbol indicates an important personal safety warning. Failure to comply with the warning may
result in very high risk for exposed personnel.
INTRODUCTION
The AD SR0 is an accessory device for the interconnection of a photoelectric light curtain in a
safety circuit. See details below about light curtain models, wiring, etc.
When deciding on the safety category to be adopted, carefully consider the risks analysis of the
machine.
The module has been designed in particular for use with the R
(category 4), Vision VX, Vision VXL/MXL, EOS2 (category 2) series. Consult R
interface with other light curtain models or safety devices.
For safe use of the device, it is essential to read and understand the contents of this handbook.
Failure to comply with the prescriptions indicated in this notice may result in very high risks for the
operating personnel of the protected machine.
INSTALLATION AND ELECTRICAL CONNECTIONS
Install the AD SR0 safety relay in an environment with a protection rating of at
least IP54.
The AD SR0 safety relay must be supplied with a 24Vdc
The external power supply must comply with the standard EN 60204-1.
ELECTRICAL CONNECTIONS
The safety relay is equipped with three terminal boards for the connections to the light
curtain and to the machine.
8
SAFETY RELAY
INSTALLATION USE AND MAINTENANCE
CJ3
AD SR0
R light curtains of the Admiral AX, EOS4
EE
20% power supply.
CJ2
CJ1
Figure 1
AD SR0
R before using the
EE
•
•
8540554
28/10/2022
Rev.16
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Reer AD SR0
Summary of Contents for Reer AD SR0
- Page 1 This symbol indicates an important personal safety warning. Failure to comply with the warning may result in very high risk for exposed personnel. INTRODUCTION The AD SR0 is an accessory device for the interconnection of a photoelectric light curtain in a safety circuit. See details below about light curtain models, wiring, etc. ...
- Page 2 Light curtain static output NOME NOME N.O. contact N.O. contact N.O. contact N.O. contact N.C. contact N.C. contact Example of connection of the AD SR0 module with JANUS safety light curtain * : USE INTERFACE SUPPRESSOR Figure 2 • • 8540554 28/10/2022 Rev.16...
- Page 3 AD SR0 Example of connection of the AD SR0 module with AX / VX / VXL safety light curtain in AUTOMATIC operatione mode Example of connection of the AD SR0 module with AX / VX / VXL safety light curtain in...
- Page 4 AD SR0 www.reersafety.com Example of connection of the AD SR0 module with MXL safety light curtain in AUTOMATIC operatione mode Example of connection of the AD SR0 module with MXL safety light curtain in MANUAL operatione mode • • 8540554 28/10/2022 Rev.16...
-
Page 5: Characteristics Of The Output Circuit
AD SR0 Example of connection of the AD SR0 module with EOS4X safety light curtain in AUTOMATIC operatione mode ➔ Further details regarding connections can be found on each curtain technical manual. Characteristics of the output circuit. For the output circuit, the safety relay uses two guided contact safety relays. -
Page 6: Technical Data
AD SR0 www.reersafety.com TECHNICAL DATA 24 20% Power supply Power requirement 1,5 max Response time 20 max Terminal block with protection against reversal of Connections polarity Max. length of connections Operating temperature °C 0 - 55 Enclosure protection rating... -
Page 7: Warranty
Precise, complete compliance with all the rules, instructions and prohibitions indicated in this handbook is an essential requirement for correct functioning of the safety relay. ReeR s.p.a. therefore declines any responsibility for all and anything resulting from failure to comply, even partially, with such indications. - Page 8 AD SR0 www.reersafety.com • • 8540554 28/10/2022 Rev.16...
- Page 9 AD SR0 All R R product manuals are available at URL • • 8540554 28/10/2022 Rev.16...
Need help?
Do you have a question about the AD SR0 and is the answer not in the manual?
Questions and answers