800 peak amp lithium ion jump starter and usb power source (16 pages)
Summary of Contents for Menards MasterForce MF295
Page 1
MF295 1500 Peak Amp Lithium Ion Jump Starter and USB Power Source 260-9465 To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference. 0099002479-00...
SAFETY SYMBOLS Some of the following symbols may be used on your jump starter. Please study them and learn their meaning. Proper interpretation of these symbols will allow better and safer operation of the jump starter. Symbol Name Designation/Explanation Volts Voltage Amperes Current...
SAFETY INFORMATION The purpose of safety symbols is to attract our attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the jump starter safely and effectively. Please read and follow these instructions and precautions carefully. 1. IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS. RISK OF EXPLOSIVE GASES.
2. PERSONAL SAFETY PRECAUTIONS Wear complete eye protection and protective clothing when working near lead- acid batteries. Always have someone nearby for help. 2.2 Have plenty of fresh water, soap and baking soda nearby for use, in case battery acid contacts your eyes, skin, or clothing. Wash immediately with soap and water and seek medical attention.
3. FEATURES 1 2 3 4 Light/USB Power button Ready LED Jump start button Battery status indicators Fault LED USB charging cable Battery clamps 12V DC car charger Built-in work light 10. USB input port 11. 12V input port 12. USB output port 13.
5. CHARGING THE INTERNAL BATTERY OF THE JUMP STARTER IMPORTANT: CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH USE AND EVERY 30 DAYS, TO KEEP THE JUMP STARTER’S INTERNAL BATTERY FULLY CHARGED AND PROLONG BATTERY LIFE. 5.1 CHECKING THE LEVEL OF THE INTERNAL BATTERY Light/USB Power button on the front of the unit.
Page 9
3. For a negative-ground vehicle (as in most vehicles), connect the jump starter’s POSITIVE (RED) clamp to the POSITIVE (POS, P, +) battery post. Next, connect the NEGATIVE (BLACK) clamp to the vehicle chassis or engine block, away from the battery.
7. MAINTENANCE 7.1 Clean the clips and the case each time you are finished using it. 7.2 Charge battery to full capacity before storage. 7.3 Never completely discharge the internal battery. 7.4 Charge after each use. 7.5 Charge at least once every month, if not in frequent use, to prevent over-discharge. 8.
Ready/Fail LED Behavior Green LED lit solid Ready to jump start Green LED flashing Ready to override Red LED lit solid and buzzer sounds Short circuit or reverse polarity continuously protection No LED lit and no buzzer beep Battery exhausted Red LED flashing and buzzer sounds every Temperature protection for unit second...
This MASTERFORCE™ brand jump starter carries our 90-Day Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE™ brand product for any reason within ninety (90) days from the date of purchase, return the item with your original receipt to any MENARDS ®...
Need help?
Do you have a question about the MasterForce MF295 and is the answer not in the manual?
Questions and answers