Security ....................... 4 Directives and standards ................... 6 Introduction......................7 Login ........................13 Single area view ....................14 Multi area view ....................19 User programming via the keypad ..............27 Appendix ......................44 Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Maintenance work must only be carried out by trained specialists. Danger of electrical shock while cleaning the device Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 5
Possible danger of death or severe bodily harm. CAUTION Danger of minor bodily injury or property damage IMPORTANT Danger of malfunctions Meaning of hazard symbols WARNING Warning of hazard area WARNING Warning of dangerous electrical voltage Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Compliance with the European Directive 2006/95/EC has been proven by testing according to the following standard: Safety EN 60950-1 2.1.1 Security Standards The SPCK620.100 and the SPCK623.100 are approved according to the following standards: Product Standard SPCK620.100 EN50131-3:2009, Grade 3, Class II, Type B SPCK623.100...
The functionality can be enhanced with key switch expander SPCE110 or indication expander SPCE120. The SPCK623 is equipped with a proximity card reader (125 kHz EM 4102) for easy user access, soft keys, large graphical LCD and voice annunciation support. The functionality can be enhanced with key switch expander SPCE110 or indication expander SPCE120.
Page 8
External bell fuse – Internal bell fuse – Bell tamper – Cabinet tamper – Aux tamper 1 – Aux tamper 2 – Wireless jamming – Modem 1 fault – Modem 1 line Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 9
Xbus over current – Installer name – Installer phone – Engineer enable – Manufacture enable – Reboot – Hardware fault – Aux over current – Battery low – Ethernet link – System name Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 10
Single area view: The user has only rights for 1 area. In the single area view, only one area is displayed in large fonts and can be controlled directly. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 11
Depending on configuration, emergency keys are displayed. A simultaneous pressing of the keys activates an emergency call. Panic Alarm Fire alarm Medical Alarm The activated process depends on the system configuration. Please ask the installer for details. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 12
Function keys in idle state Direct Settings Depending on configuration, the direct set option is displayed. A forced set / part set without PIN is possible of the area the keypad is assigned to. Siemens AB Comfort Keypad Manual A6V10271018 Security Products...
The card reader receiving area is next to the alphanumeric keypad and is indicated by following icon: Login with PIN and card (SPCK623) The card and PIN option has to be activated in the control panel. 1. Present the card / pace to the keypad.
Following states are possible: Symbol Function Fullset Unset Partset A Partset B Setting not possible If, for example, there is an open zone, the setting symbol will be displayed with an information symbol: Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 15
However, the following user alert is displayed on the keypad when the system is unset: Username RF FOB LOW BATT Subsequent setting of the system using the fob will be prevented until the alert is cleared. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 16
Please contact your installer if symbol is still indicated after closing according zone (e.g. window). Alarm can be restored. If the alarm can be restored, press the softkey below the symbol The alarm is restored. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 17
There are 2 fault symbols to indicate possible actions: Fault can not be restored. Fault condition still present. Please contact your installer. Fault can be restored. If the fault can be restored, press the softkey below the symbol Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 18
Single area view Resetting a fault The fault is restored. Ready will be shown on the display. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
All areas of this area groups are listed. 3. Scroll using the ▲ ▼ keys until the required area is visible. 4. Press the relevant context-sensitive function key to change the state. Siemens AB Comfort Keypad Manual A6V10271018 Security Products...
Page 20
This open zone cannot be inhibited (no forced set possible). Please contact your installer if symbol is still indicated after closing according zone (e.g. window). Only available if the zone attribute Exit open is enabled. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 21
In the graphics below, there is an alarm in fullset condition. 1. Scroll using the ▲ ▼ keys until the required area group is visible. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 22
Please contact your installer if symbol is still indicated after closing according zone (e.g. window). Alarm can be restored. If the alarm can be cleared, press the key Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 23
1. Scroll using the ▲ ▼ keys until the required area group is visible. 2. Press 3. Scroll using the ▲ ▼ keys until the required area is visible. 4. Press the softkey below the blinking fault symbol. Siemens AB Comfort Keypad Manual A6V10271018 Security Products...
Page 24
The keypad displays that the area will set in ‘X’ minutes or seconds. You will hear an audible beep for each elapsed minute and every 10 seconds during the final minute. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 25
Time locked applies to a vault type of area only. If time locked is applied to a vault area, you can only unset the vault during times defined by the assigned calendar. The padlock symbol is displayed next to the vault area to indicate when it cannot be unset. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 26
Within the interlock group, only one area can be unset at a time. The padlock symbol displays next to the other areas in the group to indicate that they cannot be unset. Siemens AB Comfort Keypad Manual A6V10271018 Security Products...
Allows user to add, edit, and delete user profiles if authorized with the appropriate user profile. Allows user to add, edit or delete SMS services for sending short text messages to mobile phones via the PSTN Line. SMS IDs are Siemens AB Comfort Keypad Manual A6V10271018 Security Products...
Page 28
Zones, system alerts or alerts from X-BUS devices can be manually isolated from the keypad. Isolating a zone removes that zone from the system until the user de-isolates To isolate zones, system alerts or alerts from X-BUS devices: 1. Scroll to ISOLATE and press SELECT. Siemens AB Comfort Keypad Manual A6V10271018 Security Products...
Page 29
To view a list of the inhibited zones, system alerts and X-BUS device alerts. Only the ALARM, EXIT/ENTRY, FIRE EXIT and LINE zone types can be inhibited on the SPC system. All other zone types are not displayed in the inhibit menus. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 30
The keypad buzzer sounds continuously for approximately 2 seconds to indicate that the zone activation has been detected and the number of zones left to test (displayed on the keypad) decreases. Siemens AB Comfort Keypad Manual A6V10271018 Security Products...
Page 31
4. If you select an individual area to test, you can select either TEST ALL ZONES or select a specific seismic zone to test. The message ‘SEISMIC TEST’ is display on the keypad while the test is being performed, Siemens AB Comfort Keypad Manual A6V10271018 Security Products...
Page 32
The chime function can be enabled or disabled on all zones where the chime has been programmed as an audible alert feature. To enable or disable the chime function: 1. Scroll to CHIME and press SELECT. 2. Toggle between ENABLED and DISABLED for the chime. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 33
EDIT CARD – CARD NUMBER – CARD ATTRIBUTES (see Access Control) RESET CARD DELETE CARD LANGUAGE Select a language for this user that will be displayed on the system. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 34
5. Present the card at a card reader at the selected door. The information for the new card is learned. 7.1.9.3.3 EDIT CARD If an access card is already assigned to a user it can be changed via the keypad: Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 35
If the ‘Prevent Passback’ feature is activated in a room and a user leaves this room without using the exit reader, he is not allowed to enter this room again. The user’s card can be reset to allow him to present his card once without a passback check. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 36
Edit the name of the profile if required. CHANGE AREAS Select the areas relevant to this profile. CALENDAR Select a configured calendar or NONE. RIGHT Enable or disable system features for this profile. See User Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 37
Enable / disable manufacturer access. Mapping gate on/off. SMS events The SMS notification can be set up to send a range of events that occur on the system such as: Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 38
SMS Control Select the operations that the user or engineer can perform remotely on the panel through SMS. See SMS Commands [➙ 39] NOTICE HOLDUP alarm events are not transmitted via SMS. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 39
System Unset access to. ****.USET UNSET ****. UNSET **** SSTA SSTA Retrieves the status of Status of system and applicable areas. areas ****.SSTA STATUS For a single area system, ****. STATUS Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 40
It is also possible to specify the custom name defined in the PARTSET rename field of the Options window. See Options For example: ****.ASET NIGHT ****.CLR Allows clear alerts by SMS ****. RESTORE Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 41
PIN from the keypad would activate a user duress event. 7.1.13 DOOR CONTROL This option allows you to control all the doors of the system. 1. Scroll to DOOR CONTROL and press SELECT. Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 42
1. Scroll to REPORT TO ENG and press SELECT. 2. Enable or disable this option as required. Note: The 10 events may require more than one SMS message, depending on the size of their string. Siemens AB Comfort Keypad Manual A6V10271018 Security Products...
Page 43
The ALARM LOG displays a list of alarm events. The following types are displayed in this log: Zones – Alarm – Panic System Events – Confirmed Alarm – User Duress – XBus Panic – User Panic – RPA Panic Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
RESTORE option in user programming is selected for that zone. Isolate Standard* Isolating a zone deactivates that zone until such time as Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 45
Users Manager User can configure user on the panel. Delay autoarm Standard* User can delay auto setting. Manager Bypass delay Standard User can automatically override the Unset Delay. Only Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 46
User can turn outputs (mapping gates) on and off. See Manager WPA Test Standard User can test a WPA. Manager * Functions not enabled by default for this user but can be selected. Zone chart Zone # Description Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Page 47
Appendix Zone chart Zone # Description Siemens AB Comfort Keypad Manual A6V10271018 Security Products 30.06.2015...
Need help?
Do you have a question about the SPCK623 and is the answer not in the manual?
Questions and answers