Miele W 1903A WASHING MACHINE Operating Instructions Manual page 25

The „Pre-wash" indicator
flashes
^ Start the program again.
If the indicator still flashes, call the
Miele Technical Service Department.
The „Main wash" indicator
flashes during, or after the end
of a program
If this occurs again during the next pro-
gram,call the Miele Service Depart-
ment.
Despite adequate water supply
pressure, the machine takes a
long time to fill
Clean the filters in the water inlet sys-
tem (see „ Cleaning and Care").
Problem solving guide
Large amounts of unused de-
tergent remain in the dis-
penser drawer
The water supply pressure is too low.
^ Clean the filters (see „ Cleaning and
Care").
^ Select the „ Water plus" function if
necessary.
^ If using a water softener, pour the de-
tergent into the dispenser before
adding the water softener.
Fabric softener is not com-
pletely dispensed or water re-
mains in the p compartment
The dispenser drawer was opened
while the fabric softener was being
flushed in, or
The siphon tube is incorrectly posi-
tioned or clogged. Clean it (see
„ Cleaning and Care").
25