Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
Auxiliary Function Selection..27 Table of Contents 6.8.1 Auxiliary Functions..... 28 1 Safety Instructions......6.8.2 Functions/Programmes Selec- Intended Use........ted by Pressing the Function Safety of Children, Vulnerable Keys for 3 Seconds ....Persons and Pets ......End Time ........30 Electrical Safety......
1 Safety Instructions This section includes the safety – Ranches, instructions necessary to pre- – By customers of hotels, mo- vent the risk of personal injury or tels and other accommoda- material damage. tion facilities, Our company shall not be held –...
• Do not forget to close the load- cord. Do not over bend, crush ing door when leaving the and touch the power cable to room where the product is loc- sources of heat. ated. Children and pets may • Only use the original cable. Do get locked inside and drown.
qualified electrician and Handling Safety plumber to have them make • Unplug the product before the necessary arrangements. moving, remove the water out- These operations are the re- let and water main connec- sponsibility of the customer. tions. Drain any water left in- •...
Page 7
• Do not place the product on a be running from the tap in a carpet or similar surface. It minute in order for the product would create fire hazard since to function properly. If the wa- it cannot receive air from un- ter pressure is above 1 MPa derneath.
• Place the product at least 1 cm Contact of the detergent with away from the edges of fur- your skin and eyes is danger- niture. ous. • Make sure pets do not climb Operational Safety inside the product. Check in- side the product before use.
• Take the following precautions • If you need to move the to prevent formation of biofilm product for cleaning, do not and malodours: pull on the cover. The cover can break and cause injury! – Make sure the room where •...
• The temperature in the ma- in the machine cools down in chine may rise up to 90ºC. order to avoid risk of getting Clean the filter after the water burnt. 2 Important Instructions for Environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU).
4 Installation approx. 180 kilograms. Place the product Please read the “Safety Instruc- on a solid and flat floor that has suffi- tions” section first! cient load carrying capacity. • Do not place the product on the power Your washing machine automatic- cable.
Cover B NOTICE Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure. Never move the product without the transportation safety bolts properly Rest the tabs of Cover B against the lower fixed in place.
4.5 Connecting the Drain Hose to the leaks, always secure the connection between the extension hose and the Drain draining hose of the product with a suit- 1. Attach the end of the drain hose directly able clamp so that it does not come off to waste water drain, washbasin or and cause leaks.
• The electrical connection cable infra- 4.8 Start Up structure of the product must be ad- Before starting to use the product make equate and suitable for product require- sure that the preparations described in sec- ments. It is recommended to use a resid- tion “Environmental instructions”...
powders on the laundry may build up on The product automatically adjusts the wa- the inner parts of the product in time and ter amount according to the weight of the can cause damage. laundry put inside it. 5.3 Tips for Energy and Water Saving Follow the instructions in “Pro- gramme and consumption table”.
Page 17
• Do not leave the detergent drawer open Adjusting the Detergent Amount when the washing programme is on. The amount of detergent depends on the • If you are using a programme without amount of laundry, how soiled they are and pre-washing, do not put detergent in the the water hardness.
Use of Gel and Tablet Detergents Using Bleach and Decolourants • If the detergent is fluid and there is no li- • Select a programme with pre-washing quid detergent compartment in your and add bleach at the start of pre-wash- product, place the gel detergent in the ing.
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
Requests can be e-mailed to ** : Energy label programme (AS/NZS the following address: info.australi- 2040) alaundry@beko.com ***** : These programmes can be used with Do not forget to provide the code, the HomeWhiz application. Power con- stock and serial numbers of the...
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
Page 24
it provides high energy and water savings. lergic and hygienic washing at high temper- Actual water temperature may be different ature with intensive and long washing from the stated wash temperature. When cycle. The high level of hygiene is ensured you load the machine with less laundry thanks to the steam application before the (e.g.
Page 25
• Mix Use to wash your cotton and synthetic • Shirts clothes together without sorting them. This programme is used to wash the shirts made from cotton, synthetic and synthetic • Delicate blended fabrics altogether. It reduces You can wash your delicate clothes such as wrinkles.
which duration of rinse hold, washing ac- Thanks to its delicate washing movements tion, washing and rinsing duration are mod- and spinning profile, the soft toys pro- ified. gramme protects the toys during washing. It is recommended to use liquid detergent. Below you can find the soil groups that can be selected with the “Quick Wash”...
If you scroll to cold wash option No change can be made in pro- and press Temperature Adjustment grammes where spin speed adjust- button again, the recommended ment is not allowed. maximum temperature for the se- You can change the spin speed after the lected programme appears on the washing starts if the washing steps allow it.
While it differs with each programme, when When an auxiliary function button you press the Quick Wash button once, the that cannot be selected with the programme duration will drop to a certain current programme is pressed, the level. If you press the same button for the washing machine will make a warn- second time, it will drop to the minimum ing sound.
ing the 8-hour duration. Press the function When the Specialised Programme selection key or the machine on/off key to auxiliary function is selected, the cancel the function. The programme follow- washing performance and energy up light will remain on until the function is consumption will be different than cancelled or the step is complete.
After a certain period when the end • Wireless Connection time function is activated, the ma- You can match your machine and your chine switches to stand-by mode smart devices with the wireless connec- and some LEDs on the display are tion.
3. Set the End Time of your choice by pressing the End Time button. End Time indicator lights. 4. Press Start / Pause. Time countdown If the Remote Control Function is starts. selected, the door will be locked. In order to open the door you must de- Additional laundry can be added activate Remote Control Function into the machine during the End...
Switching the machine to pause mode: Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash on the display. 6.12 Changing the Selections After Changing the programme selection after Programme has Started programme has started: Adding laundry after the programme has The programme change is not allowed when the current programme is running.
The , Bluetooth of your smart device should If you turn the programme selection be on and your device should be connected knob when the Child Lock is en- to the internet during setup. Your smart abled, the programme will not be device should be close to the washing ma- cancelled.
5. Wait until the installation is complete. All safety measures described in When setup is complete, give your the "GENERAL SAFETY INSTRUC- washing machine a name. Now, you see TIONS" titled section of the user the product you have added in the manual are also valid for remote HomeWhiz Application.
6.15.2 Setting up a Washing Machine After this operation, you cannot use the HomeWhiz function of your washing ma- Connected to Someone Else's chine until you do another setup. Account Your product does not need to be connec- If the washing machine you want to use ted to the internet in order to delete an ac- was previously introduced to the system count matching.
In certain cases, it deactivates itself for safety reasons: • When your washing machine undergoes a power interruption. • When the door of the washing machine is opened,. • When programme knob is turned and a When the Remote Control is enabled, you different programme selected or appli- can only manage the machine, turn it off ance is turned off.
3. Rinse drawer and syphon in the sink Use only a soft and damp cloth to clean the with plenty of warm water. Use gloves control panel. Do not use cleaning products or suitable brush to prevent contact of that contain bleach residues in the drawer with your skin.
In addition, prior to transporting the product 3. Follow the below procedures in order to (e.g., when moving to another house) water drain water. should be drained completely. If the product has an emergency water draining hose, in order to drain the water: NOTE: Foreign substances left in the pump filter may damage your...
Page 39
lection button or pressing and holding • Pump filter is clogged. >>> Clean the the On/Off button for 3 seconds to can- pump filter. cel the program. Previous programme Product stopped shortly after the pro- will be cancelled. See Cancelling the Pro- gramme started.
Page 40
• Input temperature of water is low. >>> • The product will not spin if water is not Required time to heat up the water ex- drained completely. >>> Check the filter tends in cold seasons. Also, washing and the draining hose. time can be lengthened to avoid poor •...
Page 41
• Excessive amount of detergent is used. • Draining hose is folded. >>> Check the >>> Put the detergent in the correct com- drain hose. partment. Do not mix the bleaching agent Laundry became stiff after washing. (**) and the detergent with each other. •...
Page 42
• The detergent in the main wash compart- Foam is overflowing from the detergent ment got wet while taking in the prewash drawer. water. Holes of the detergent compart- • Too much detergent is used. >>> Mix 1 ment are blocked. >>> Check the holes tablespoonful softener and ½...
Need help?
Do you have a question about the BFLB1020W and is the answer not in the manual?
Questions and answers