Table of Contents
Advertisement
Quick Links
HO04A01KNX
TO04A01KNX
MO04A01KNX-X
SO08A01KNX
SO08L02KNX
SO04L02KNX
TO04L02KNX
MO04L02KNX-X
Thermostat / Humidistat 4 Buttons | 8 ch - RGB Swiper
Thermostat 4 Buttons | 8 ch - RGB Swiper
MultiSensor 4 Buttons | 4 ch - RGB Swiper
Switch 8 Buttons | 16 ch - RGB Swiper
Lite Switch 8 Buttons | 16 ch - RGB
Lite Switch 4 Buttons | 8 ch - RGB
Switch 4 Buttons | 8 ch - RGB
Lite Multisensor 4 Buttons | 4 ch - RGB
USER MANUAL
Translation of the original instructions
Version: 1.0
Date: 31/May/2024
Advertisement
Table of Contents
Related Manuals for Eelectron MO04A01KNX-X
Summary of Contents for Eelectron MO04A01KNX-X
- Page 1 Thermostat / Humidistat 4 Buttons | 8 ch - RGB Swiper TO04A01KNX Thermostat 4 Buttons | 8 ch - RGB Swiper MO04A01KNX-X MultiSensor 4 Buttons | 4 ch - RGB Swiper SO08A01KNX Switch 8 Buttons | 16 ch - RGB Swiper...
-
Page 2: Table Of Contents
OL-U SERIES Contents Introduction to the user manual ..............................4 Meaning of the symbols used ..............................4 Products overview ..................................4 Installation instructions ................................5 Configuration and commissioning ............................. 5 KNX Secure .................................... 5 General parameters .................................. 6 General settings ..................................6 Buttons configuration ................................ - Page 3 We therefore cannot accept any liability for this. Any neces- sary corrections will be incorporated into newer versions of this manual. Eelectron S.p.A. Via Claudio Monteverdi 6, I-20025 Legnano (MI),Italia Tel +39 0331.500802 info@eelectron.com OL-U_UM_EN M E M B E R...
-
Page 4: Introduction To The User Manual
KNX functions. A freely configurable RGB Led bar is also available for dis- • MO04A01KNX-X: MultiSensor 4 Buttons | 4 ch - RGB Swip- playing states or other quantities available on the KNX bus. • 32 logic blocks are available to implement simple expres-... -
Page 5: Installation Instructions
“safe” device. For this purpose, the camera is available as a QR the ETS® (Engineering Tool Software). For the configuration of Code Reader or the code must be entered manually the device parameters the corresponding application program or the whole eelectron® product database must be loaded in the 92 mm 25 mm ETS® program. -
Page 6: General Parameters
Humidity sensor disabled / enabled power-up Versions HO04A01KNX, MO04A01KNX-X and MO04L02KNX-X in- Through this parameter it is possible to set the telegram transmission clude a humidity sensor to perform ambient humidity measurement delay after switch-on by selecting the time beyond which the device is with a tolerance of ±2% between 0% and 90% RH. -
Page 7: Display
OL-U SERIES Display none: no function associated bus value: it enables the CO “<LED Quality> Off / On” and “<LED Quality> Color” for sending the activation telegram and set the color of the LED. LEDs For temperature, humidity CO2 and VOC indicators, are set thresholds with colour corresponding to values under or above threshold. -
Page 8: Front Panel
OL-U SERIES KNX PARAMETER SETTINGS Economy mode never switch OFF, 1 to 15 min none When this option is enabled, the device enters economy mode after a configurable time. It’s possible to configure a behaviour for each LED bus value LED Cooling in the front panel when it enters Economy mode. When the device en- cooling (internal management) ters Economy mode, the device is awakened by the touching Swiper none: no function associated... -
Page 9: Swiper
OL-U SERIES HVAC remote control Object enable disabled / enabled This parameter enables the object “<Special Button - x> Enable Ob- Communication objects involved: ject” of the relative special button. Initial enable state disabled / enabled “<Special button> HVAC Control Feedback” 1 byte This parameter defines whether to have the object “<Special Button - “<Special button>... - Page 10 OL-U SERIES SLOW Multiple % values from left to right In General parameters it’s possible to set the configuration and Increase direction from right to left average of algorithm for this function. It defines the direction to follow for increasing the percentage. KNX PARAMETER SETTINGS 0 ... 8 for thermostat Main button (0=last used) 0 ... 16 for switch prefer resolution over accuracy Configuration normal...
- Page 11 OL-U SERIES To avoid a wrong reading of the swipe direction, Send R+G+B do not go beyond the action area indicated in the This parameter enables the objects figure • “<Swiper-Slow> Red” • “<Swiper-Slow> Green” Communication objects involved in each function: •...
-
Page 12: Leds
OL-U SERIES TAP LEFT, TAP RIGHT, DOUBLE TAP L / R “<LED x> Color Change Index - OFF” 1 Byte CW “<LED x> Color Change Index - ON” 1 Byte CW For the devices: SO08L02KNX: Lite Switch 8 Buttons | 16 ch - RGB SO04L02KNX: Lite Switch 4 Buttons | 8 ch - RGB Tap gesture can be associated with both basic and special func- TO04L02KNX: Lite Thermostat 4 Buttons | 8 ch - RGB... -
Page 13: Temperature Function 1 / 2
OL-U SERIES 9. Temperature function 1 / 2 This parameter defines the delay in sending the “output” objects on the BUS, applied after the calculation Please refer to the “Thermostat and additional probe” user ma- index to RGB nual. Conversion RGB to index index to RGB: in this mode, writing a value (0-13) on the 1 byte CW 10.
Need help?
Do you have a question about the MO04A01KNX-X and is the answer not in the manual?
Questions and answers