Table of Contents
Advertisement
Example time interval.
In the example below, a "night" period will last
from 00:00 till 06:00. "day" period will last
between 06:00 – 09:00. From 15:00 to 22:00
the "day" period was entered. "night" period
will last from 22:00 to 00:00.
An interval is ignored if the decrease
value is set to "0", even if its range
of hours was specified.
Summer/Winter function
The SUMMER / WINTER function is responsible
for the automatic or manual turns on of
heating. It also allows the loading of the HUW
container in the summer, without the need to
heat the central heating system. Must set the
parameter SUMMER mode = ON, in:
Main menu → Summer/Winter → Summer
mode
In
SUMMER
recipients may be OFF, therefore,
make sure the boiler will not be
overheated.
If
the
external
temperature
connected SUMMER function can be turned on
automatically using the Auto parameter,
including
temperature
Summer mode ON temp. and Summer mode
OFF temp.
General settings
In general settings, can change the settings
date, time, brightness and contrast of the
screen. Can turn on and turn off the sound,
mode,
all
heat
sensor
is
settings
for
the
and change the language menu for the
controller.
Information
The
information
information temperatures and allows to see
which devices are currently enabled. By
turning the encoder TOUCH&PLAY changes
between successive windows of information.
Additional functions
Easier support for the user, eg. if turn off
support for the heat source to all the features
associated with this parameter disappear -
you can then control the heating circuit. It's
the same when you turn off the heating circuit
- be able to control the heat source with using
a heat source contact and the heat source
sensor.
There is also possible to control the heating
circuit with mixing, with optional thermostat
influence the heating circuit.
10
menu
allows
to
view
Advertisement
Table of Contents
Need help?
Do you have a question about the EWT100 and is the answer not in the manual?