Download Print this page

Hope Education E.a.R.L 2 User Manual

Download this manual

user guide

An interactive coding and programming robot

designed specially for the EYFS, KS1 and KS2

Need help?

Do you have a question about the E.a.R.L 2 and is the answer not in the manual?

Page 1 user guide An interactive coding and programming robot designed specially for the EYFS, KS1 and KS2...
Page 2 Using the USB lead provided, connect E.a.R.L 2 to any USB port or USB charger. E.a.R.L 2’s eye will light red to show it is charging. When E.a.R.L 2 is fully charged, the eye will • Can turn any number of degrees light green.
Page 3 Insert a light Turn right 90° When you connect E.a.R.L 2 to a PC or Mac, E.a.R.L will appear as a Mass Storage Device effect program (just like a memory stick). In the “ZH” folder you will find an MP3 sound for each of the default system sounds.
Page 4 UK: www.hope-education.co.uk/earl-has-landed International: www.findel-international.com/earl-has-landed 4. Switch E.a.R.L 2 on, then using the USB lead provided, connect E.a.R.L 2 to a USB port on your PC. Press and hold the “GO” button for 5 seconds. The LEDs will flash blue, E.a.R.L 2 will be detected by your computer, and the necessary driver will be loaded automatically.
Page 5: Care And Maintenance
In the event of a static discharge, your E.a.R.L 2 may malfunction. In this case, please switch it off and then back on again to reset it. Care and maintenance: If necessary, wipe E.a.R.L 2 gently with a clean damp cloth. Do not use solvents or abrasives. Specification: Warranty information Battery type Rechargeable 3.7v...