Related Manuals for hilmor 1947970-3 CFM
Summary of Contents for hilmor 1947970-3 CFM
- Page 1 Vacuum Pump Operation and Maintenance Instructions Models 1947970-3 CFM 1948121-5 CFM 1948122-9 CFM 1.800.561.8187 information@itm.com www. .com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction ......................3 Key Features ......................4 Safety/Limited Warranty ................5 Grounding Instructions ..................6 Quick Start Guide ..................... 7 Maintenance ......................8 Pump Components ..................9 Technical Specifications ................10 Operating Instructions ................11-12 Troubleshooting ..................... 13 Technical Drawing ..................14 1.800.561.8187 information@itm.com www. -
Page 3: Introduction
Vacuum Pumps are factory-tested to guarantee EXTRA CONFIDENCE 25 microns of ultimate vacuum. Please inspect the hilmor • A blank-off valve isolates the hilmor Vacuum Pump from the Vacuum Pump immediately for any in-transit damage. system for accurate vacuum readings and easy oil changes while maintaining vacuum. -
Page 4: Safety/Limited Warranty
INSTRUCTIONS SAFETY PRECAUTIONS: • The hilmor Vacuum Pump must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an To prevent personal injury, please read the operating manual carefully and escape wire for the electric current. -
Page 5: Quick Start Guide
QUICK START GUIDE VACUUM PUMP OIL: • The condition and type of oil used in the hilmor Vacuum Pump are extremely Add hilmor Vacuum Pump Oil until it has reached between the Min important to achieve deep vacuum. For premium performance, use and Max levels on the sight glass. -
Page 6: Pump Components
PUMP COMPONENTS TECHNICAL SPECIFICATIONS Hoist Points Inlet Tree Fitting Part Number 1947970 1948121 1948122 Blank-off Valve Model 3 CFM 5 CFM 9 CFM Ultimate Vacuum 25 microns 25 microns 25 microns Electrical Housing Motor 1/3 HP 1/2 HP 1 HP Power Cord Oil Fill Port/Exhaust Voltage... -
Page 7: Operating Instructions
1. Check the voltage at the outlet to ensure it matches the specifications on 1. Blank off at the manifold or hilmor Valve Core Removal Tool by moving the the hilmor Vacuum Pump motor plate. Ensure that the power switch is in handle to the off position. -
Page 8: Troubleshooting
Use a shorter extension cord Extension cord is too long for power If these procedures do not correct the issue, contact your nearest Fan Shroud hilmor Distributor or call hilmor Technical Support at 1-800-628-8810. Fan Shroud Screw & Washer Electrical Housing 1.800.561.8187 information@itm.com www. - Page 9 1.800.561.8187 information@itm.com www. .com...
Need help?
Do you have a question about the 1947970-3 CFM and is the answer not in the manual?
Questions and answers