AVIRE E-Motive Panorama iP2 Installation Manual

iP2 Panorama
Multimedia Display
Installation Guide
05-E-01-IG-01-GB
Items Required for Installation
+ Screen
+
Lens
+
Power Supply
+ Cable
+ Processer
+ Processer Power Supply
+ Speaker
Mounting Instructions (Display Panel and Power Supply)
1. Before installation please ensure there is sufficient air space around LCD unit for ventilation
2. Remove from box and unpack lens and screen panel
3. Carefully remove protective film from both sides of lens
4. Mount the lens on the fixing studs behind the COP panel
5. Mount the screen to the fixing studs behind the COP panel using a flat and spring washer on each stud before
engaging nut
6. Mount speaker if desired
7. Power supply must be mounted within 1.5m but no closer than 1m
8. Plug power supply into display
9. Connect 240VAC main power to the power supply*
*Please adhere to instructions on power supply
Mounting Instruction (Processor)
1. Mount Processor using mounting holes on the fixed bracket and add a flat and a spring washer before engaging nut
2. Processor's power supply must also be mounted within 1.5m but no closer than 1m
3. Plug power socket into processor
4. Plug cable (VGA) into processor and connect to display
5. Power up the system
6. The screen should become active