SWEEX MI410 Manual

Notebook wireless optical mouse 2.4g

English version

MI410 Sweex Notebook Wireless Optical Mouse 2.4G

• Do not expose the Sweex Wireless Mouse to extreme temperatures. Do not place the device in direct sun light or close to

heating elements.

• Do not use in extremely dusty or moist environments.

• Prevent hard shocks or impacts of the device, as this can cause damage to the internal electronics.

• Never try to open the device yourself, this voids the warranty.

Installing

1. Place the batteries in the mouse.

2. Take the USB dongle out of the mouse

3. Place the USB dongle in a USB port of the computer.

4. Windows will install the mouse automatically.

5. The mouse is now ready to be used.

To program and configure the buttons on the mouse you first have to install the software on the CD-ROM. Place the Sweex CD-

ROM in the computer. It will start automatically. Choose "Software".

Follow the procedure to install the software and reboot the computer when asked. To start the software there is an icon at the

bottom right of your screen. Press on the mouse icon to configure the mouse.

Table of Contents

Do you have a question about the MI410 and is the answer not in the manual?

Page 1 English version MI410 Sweex Notebook Wireless Optical Mouse 2.4G • Do not expose the Sweex Wireless Mouse to extreme temperatures. Do not place the device in direct sun light or close to heating elements. • Do not use in extremely dusty or moist environments.
Page 2 English version Be aware that when the mouse is not used for a period of time it will go in to hibernation mode. To re-activate the mouse press one of the mouse buttons once. To indicate that the batteries of the mouse are almost empty a red light at the bottom of the mouse will blink rapidly.