Haier MD-2485M Operating Panel page 12

MICROWAVE control panel GB Function description
Attention! Before using the appliance for the first time, read
the "MICROWAVE" general instructions (see separate book)
Indicator light "Minutes"
1
Lights up when a number of minutes is shown in the LED
display.
Indicator light "Seconds"
2
Lights up when a number of seconds is shown in the LED
display.
LED Display
3
Cooking time display
Cooking timer
To increase cooking time: turn the knob clockwise to the
right.
To reduce cooking time: turn the knob to the left
The cooking time set is indicated in the LED display.
Example:
4
1st. cooking time 2 min: LED display "02" & (1) lights up
2nd. cooking time 25 sec.: LED display "25" & (2) lights up
Two seconds later cooking programme is being executed
and the clock counts down.
The cooking time can also be increased or reduced while
the appliance is operating.
3. Programme completed: LED display "00" & 5 Beep signal
Power levels
Turn the knob until the mark (6) is in line with the desired
5
power level.
The power level can be changed during operation.
Power level mark
The mark must be exactly lined up with a power level.
In any event, a continuous beep tone indicates that the mark
6
is between two power levels.
In this case, turn the knob (5) forwards or backwards until
the beep tone switches off.
7 Power levels:
Low = Low microwave power
Intermediate level Low-Med
Med = Medium microwave power
Intermediate level Med-M.H
M.H. = Medium High microwave power
Intermediate level M.H-High
High = High microwave power
See the next page
cooking programme
3
ID CODE 050MWO
(Max. 30 min.)
for an example of programming a