1. Manuals
  2. Brands
  3. Buhler Manuals
  4. Tractor Accessories
  5. 2695
  6. Operator and parts manual

Buhler 2695 Operator And Parts Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2695 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Buhler 2695

Summary of Contents for Buhler 2695

  • Page 2 WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.

  • Page 3: Table Of Contents

    Allied Front-End Loader 2695 OPERATOR’S AND PARTS MANUAL Table of Contents Description Page Registration and Policy Loader Specifications ..................Introduction Terminology ....................Serial Decal Location ................Safety General Safety Notes ................Safety Decals .................... Important Precautions ................Pre – Operation ....................10 Operation General Operating Notes ................

  • Page 4: Loader Specifications

    bühler Allied Front-End Loader LOADER SPECIFICATIONS Illustration 45° 55.0 59.0 ±3.0 31.5 125.5 - 2 - P4401...
  • Page 5 Allied Front-End Loader Specification Chart 2695 Item Description Maximum lift height to pivot pin [in/cm] 157/399 Maximum lift height under level bucket [in/cm] 147/373 Clearance with bucket dumped [in/cm] 123/312 Reach at maximum lift height [in/cm] 37/94 Maximum dump angle [deg]...

  • Page 6: Introduction

    Keep this manual for reference and to forward to new operators and owners. Contact your local Buhler - Allied dealer if you require any assistance, information or additional manuals. Terminology: Basic terminology used throughout this manual has been identified below.

  • Page 7: Serial Decal Location

    Please record the serial number in the space provided for future reference. The serial decal will provide the model and date of manufacture of the loader and will be required to obtain correct replacement parts and complete warranty claims. Buhler Manufacturing For your records, record "a partnership"...

  • Page 8: Safety

    bühler Allied Front-End Loader SAFETY Read and understand all the safety messages listed in this manual. For your safety and the safety of others near the machine, learn how to control and operate the loader properly. It is your responsibility to inform subsequent operators and owners of these precautions.

  • Page 9: Safety Decals

    bühler Allied Front-End Loader Safety Decals: Safety Decal Location illustrates the approximate location and detail of safety decals. To install safety decals ensure the installation area is clean and dry. Decide on the exact position before you remove the backing paper. Remove the smallest portion of the split backing paper and align over the specified area.
  • Page 10 bühler Allied Front-End Loader Safety Decal Location - 8 - P4401...
  • Page 11 bühler Allied Front-End Loader The following pictorials indicate important precautions to be used during the operation of the loader. WARNING DANGER FALLING HAZARD ELECTROCUTION HAZARD To prevent serious injury or death: To prevent serious injury or death: Do not lift, carry or allow anyone to ride on or work from any Stay away from power lines and cables.

  • Page 12: Pre - Operation

    bühler Allied Front-End Loader PRE – OPERATION WARNING The tractor must be equipped with an approved Roll over Protection Structure (ROPS) and safety belts to help prevent personal injury or death caused by tractor roll over. CAUTION Maximum rated loader capacity may exceed tractor rating.

  • Page 13: Operation

    bühler Allied Front-End Loader OPERATION General Operating Notes: following section provides general information that can be applied towards your specific application. Ensure that you’ve read and understood this manual and your Tractor Manual. Observe all safety precautions and follow local laws pertaining to the use of your loader and tractor.

  • Page 14: Bucket

    Allied Front-End Loader All Buhler-Allied hydraulic valves are self-centering and return to neutral from all positions except float. The float or detent spool is only to be used on the boom circuit. This position allows the oil to freely flow through the valve so the lift cylinders can extend or retract.

  • Page 15: Backfilling Or Scraping

    bühler Allied Front-End Loader Minimize turning angle and length of run between pile and trailer to increase loading efficiency. Also, place load evenly or centered in the attachment. WARNING Carry the load no highe than necessary clear the terrain. Turn and brake slowly. Always be sure that loading area is level and on solid ground.

  • Page 16: A - Frame

    bühler Allied Front-End Loader or back grading, either load the bucket and position the heel on the ground or position the bucket at 40° or less below level as shown. Place the valve in the float position and back up slowly. IMPORTANT: Float position must be used to reduce down pressure, otherwise cylinder...

  • Page 17: Handling Bales And Pallets

    bühler Allied Front-End Loader andling bales and pallets: or safe handling of bales and pallets please follow procedures below: WARNING Do not operate A – Frame for bales without the stabilizers. With a single spear, enter one of the ends of the bale and drive the spear horizontally into the center or slightly above center of the bale and fully penetrate the bale.
  • Page 18 bühler Allied Front-End Loader When loading bales onto a trailer, park trailer in close proximity to minimize turning angle and length of travel to increase loading efficiency. s you lift the bale using the regular loader, it is recommended to feather the valve to allow bucket cylinders to extend to keep bale at about a 20°...

  • Page 19: Grapple

    bühler Allied Front-End Loader Grapple: The grapple is designed to safely prevent loads (bales, silage) from falling out of the bucket. (Refer to pictorial below for options listed) WARNING Trave at low speeds. Carry loads as low as possible. Avoid sharp turns and uneven terrain.

  • Page 20: Installing / Removing Loader

    bühler Allied Front-End Loader INSTALLING / REMOVING LOADER Installing: CAUTION Prior to initial mounting, cycle loader cylinders to displace air. This ensures the loader will remain in the storage position and operate consistently. 1. Position the tractor centrally and parallel to the loader uprights.

  • Page 21: Removing

    bühler Allied Front-End Loader With the tractor in neutral, continue to retract the lift cylinders and extend the bucket cylinders to rotate the upright back against the lock pin stops. Shut the tractor off and set park brake. Install both upright attachment pins and secure with hairpin clip.
  • Page 22 bühler Allied Front-End Loader Lower attachment level to the ground while engaging float position. Ensure attachment rests firmly on ground with minimal downward pressure. If required extend bucket cylinders to rotate upright rearward. At this stage the pin should have no pressure. Set tractor park brake and remove loader lock pins.

  • Page 23: Installing / Removing Loader Attachments

    bühler Allied Front-End Loader INSTALLING / REMOVING LOADER ATTACHMENTS Installing: Position tractor centrally within the bucket hooks. Dump Quick-tach slightly from vertical position. Slowly drive the tractor forward until the Quick-tach contacts the bucket. Slowly raise the loader to engage the Quick-tach within both bucket hooks.

  • Page 24: Lubrication

    bühler Allied Front-End Loader LUBRICATION Lubricate loader bushings and pivots every eight hours of average operation with high-grade grease. For grease fitting locations see illustration below. Select grease based on the expected outside temperature range. Lithium, Molybdenum and synthetic greases are preferred. Use the tractor hour meter as a guide.

  • Page 25: Maintenance

    bühler Allied Front-End Loader MAINTENANCE General Inspection: CAUTION Lower attachment and loader to ground, place all controls in neutral, stop engine, set parking brake and remove ignition key before inspecting, servicing, adjusting or repairing loader. WARNING Relieve hydraulic pressure before repairing, adjusting or disconnecting hydraulics components.

  • Page 26: Mounting Kit

    bühler Allied Front-End Loader Mounting Kit: After the initial 2 weeks or 40 hours of loader operation, and 6-month intervals thereafter re-torque all mounting kit bolts. (See below for proper bolt torques) (Side plate part of mounting kit) Loader mount plate (part of mtg.

  • Page 27: Hydraulics

    bühler Allied Front-End Loader Hydraulics: WARNING Escaping fluid under pressure can have sufficient force to penetrate the skin, causing serious personal injury. Before repairing, adjusting, or disconnecting lines, be sure to relieve all pressure. Before applying pressure to the system, be sure all connections are tight and the lines, pipes, and hoses are not damaged.
  • Page 28 bühler Allied Front-End Loader A yearly inspection of the valve is recommended. However the maintenance intervals on the valve depends on the surrounding environment or if valve spools become stiff. Where temperatures fluctuate from one extreme to another or exposed to high salt the intervals for maintenance should be increased to protect from corrosion.
  • Page 29 bühler Allied Front-End Loader On valves fitted with joystick cables loosen off jam nut and cable sleeves to gain access to the valve spool. Clean all debris and any existing corrosion. Spray areas with a light corrosion resistant lubricant. Re-mount cables sleeves and adjust so that joystick is centered in both axis to the base.

  • Page 30: Trouble Shooting

    bühler Allied Front-End Loader TROUBLE SHOOTING Problem Possible Cause Remedy Loader slow and/or will not Quick couplers leaking Check connections and dump. compatibility or replace. Hydraulic oil too heavy. Change or replace filter. Oil filter plugged. Clean or replace filter. Hydraulic pump worn.
  • Page 31 bühler Allied Front-End Loader Trouble Shooting Continued Problem Possible Cause Remedy Insufficient lift capacity. Improper hydraulic pump Repair or replace pump. operation. Load is greater than boom Check loader specifications. lift capacity. Internal boom cylinder Replace any worn parts and leakage.

  • Page 32: Parts Appendix

    Allied Front-End Loader PARTS APPENDIX Description Page 2695 Main Frame Assembly ................31 Hydraulic Plumbing ..................33 Notes ......................35 Cylinders ....................36 Hydraulic Fitting Torques ................37 Prevailing Torque Locknuts ............... 37 - 30 P4401...

  • Page 33: Main Frame Assembly

    Allied Front-End Loader 2695 Main Frame Assembly - 31 P4401...
  • Page 34 Allied Front-End Loader 2695 Main Frame Assembly Item Part No. Description 2695 25323 2695 Main Frame Weldment 25067 2695 Quick Attach Weldment Ref. Lift Cylinder (see cylinder assembly) Ref. Bucket Cylinder (see cylinder assembly) 114823 Pin Weldment (Quick Attach)

  • Page 35: Hydraulic Plumbing

    Allied Front-End Loader 2695 Hydraulic Plumbing Assembly - 33 P4401...
  • Page 36 Allied Front-End Loader 2695 Hydraulic Plumbing Assembly Item Part No. Description 2695 Ref. Bucket Cylinder (See cylinder assembly for breakdown) Ref. Lift Cylinder (See cylinder assembly for breakdown) 811434 Hose 3/8 x 30 ¾ - 16 MORB x 3/4 – 16 SWFJIC 812696 Hose 3/8 x 18 ¾...

  • Page 37: Notes

    bühler Allied Front-End Loader Notes: - 35 P4401...

  • Page 38: Cylinders

    Allied Front-End Loader 2695 Cylinder Assembly Bucket Cylinders Lift Cylinders Regular Regular Diameter 3.00" 3.00" Length of Stroke 21.50" 30.00" Retracted Length 31.00" 41.50" Extended Length 52.50” 71.50" Cylinder Assembly No. 24913 24314 Seal Kit No. X1424 X1424 Shaft Diameter 1.75"...

  • Page 39: Hydraulic Fitting Torques

    bühler Allied Front-End Loader Hydraulic Fitting Torques: Jam Nut or Straight SAE 37° (JIC) Thread Dash Size ORB Fitting Torque Swivel Nut Torque Size (ft-lbs) (NM) (ft-lbs) (NM) 7/16-20 14-16 20-22 10-11 13-15 18-20 24-27 13-15 18-20 1/2-20 9/16-18 24-26 33-35 17-19 23-26...
  • Page 41 ON, Jasper Skovde, Sweden (613) 283-1758 Chihuahua, Mexico 011-46-500-452651 011-52-158-90306 QC, Dorion Naestved, Denmark (450) 455-4840 011-45-557-29511 “ Buhler Manufacturing a partnership” 1201 Regent Ave. W. Winnipeg, MB. R2C 3B2 Ph.: (204) 661-8711 Fax: (204) 654-2503 www.buhler.com Printed in Canada...

Table of Contents