Sharper Image 209487 User Manual page 4

ADJUSTING THE GRIND
• Adjustment Knob: This product adopts an adjustment knob that can be rotated between the
finest and coarsest grinding.
• Adjust to Fine:
- Rotate the adjuster from "COARSE" to "FINE".
- Continue to rotate until the desired fineness is achieved.
• Adjust to Fine:
- Rotate the adjuster from "FINE" to "COARSE".
- If the adjuster loosens, it could be caused by some pepper grains stuck in the burr.
- Start the product to rotate; the burr will be loosened, and you can continue to adjust.
- This is a normal situation for ceramic burrs and will not affect its normal use.
NOTE: Avoid Upside Down - With seasonings in the container, do not turn the grinder upside
down to prevent grains of seasonings from getting into the battery compartment and causing
battery corrosion.
TROUBLESHOOTING
If the grinder does not work or stops while grinding:
• Charge the Product: Ensure the grinder is charged before use. (Note: It is not recommended to
use the product while charging.)
• Adjust the Grinder Knob: Rotate the grinder knob in a counterclockwise direction.
WARRANTY AND CUSTOMER SERVICE
This item from SharperImage.com includes a 1-year limited replacement warranty. If you have
any questions not covered in this guide, please call our Customer Service department at 1 (877)
210-3449. Customer Service agents are available Monday through Friday, 9:00 a.m. to 6:00 p.m.
ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
- 4 -