Advertisement
Quick Links
Advertisement
Related Manuals for Sharper Image SI-428
Summary of Contents for Sharper Image SI-428
- Page 1 HANDHELD FABRIC STEAMER OWNER’S GUIDE MODEL SI-428...
-
Page 3: Table Of Contents
CONTENTS Important Safety Instructions .............................4 Product Information ................................7 Filling Reservoir ..................................9 Fabric Steaming .................................10 Storage & Care ..................................12 Troubleshooting ..................................14 Warranty.....................................15 English... -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. - Page 5 If no steam appears, wait a few more minutes and test again. Do not look into the appliance, use your hands or other objects to check for steam. - Do not leave appliance unattended while connected. - To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
- Page 6 WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC CONSUMER ADVISEMENT: This equipment may generate, use and/ or radiate radio frequency energy that may cause harmful interference to radio communications.
-
Page 7: Product Information
PRODUCT INFORMATION The following features are included with your Handheld Fabric Steamer. Carefully inspect the packing material for all parts listed below. To obtain possible missing parts, contact (833.800.8669) or (help@sihomecomfort.com). UNIT FEATURES Steam Nozzle Water Reservoir Cap Reservoir Level Window Reservoir (Internal) Power Switch Handle... - Page 8 The Steam Nozzle emits the flow of hot, penetrating steam produced by the Reservoir. The Water Reservoir Cap is designed to safely contain steam inside the Reservoir, while providing easy access to the Reservoir’s fill hole. The Reservoir Level Window permits a clear view of the water level inside the Reservoir, and is marked to indicate the maximum water level for easy filling.
-
Page 9: Filling Reservoir
FILLING RESERVOIR 1. Place Handheld Fabric Steamer on a flat, level surface. 2. Make sure power cord is unplugged from electrical outlet. CAUTION: If unit has been in use, allow Reservoir to cool (5 minutes for minimum cooling before removing Water Reservoir Cap and adding water). 3. -
Page 10: Fabric Steaming
FABRIC STEAMING CAUTION: When steaming any material for the first time, it is recommended that you test on a small inconspicuous area before proceeding. Do not use on synthetic fabrics such as 100% nylon or polyester, or other steam-sensitive materials. NOTE: Be sure the Reservoir has already been filled before following these steps. - Page 11 GENERAL STEAMING TIPS For most effective results, hold Steam Nozzle within 1/2 inch of fabrics, or press it directly against surfaces. Curtains and draperies can be steamed while still hanging. To remove wrinkles from towels, handkerchiefs and napkins, drape them over a rod or towel rack and gently steam them.
-
Page 12: Storage & Care
STORAGE & CARE PROPER STORAGE Preparing your Handheld Fabric Steamer for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below. 1. Unplug power cord from electrical outlet. 2. Allow unit to cool (15 minutes for complete cooling). 3. - Page 13 MAINTENANCE After EACH USE, allow unit to cool, add 1 oz. water, shake to release mineral buildup and empty tank. TO REMOVE MINERAL BUILD-UP 1. Unplug power cord from electrical outlet. IMPORTANT: Unit should remain unplugged during cleaning procedure. 2. Allow unit to cool (15 minutes for complete cooling). 3.
-
Page 14: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE AND SOLUTION Unit fails to heat up. Unit is not plugged in. Plug power cord into electrical outlet. Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker / ground fault interrupter, or replace fuse. -
Page 15: Warranty
SATISFACTION G U A R A N T E E Vornado Air, LLC warrants to the original consumer or purchaser this Sharper Image® Steam Product (“Product”) is free from defects in material or workmanship for a period of one (1) year from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost. - Page 16 Sharper Image® name and logo are registered trademarks. Manufactured, marketed and distributed under license by Vornado Air LLC, Andover, Kansas 67002. Manufactured in China. U.S. Patents Pending. Sharper Image® Distributed under license by Vornado Air LLC, Andover, Kansas 67002. 16 English...
- Page 17 T428-001 R-, V00...
Need help?
Do you have a question about the SI-428 and is the answer not in the manual?
Questions and answers