Download Print this page
Hide thumbs Also See for METOS Dualex:

Advertisement

Quick Links

EN GLISH
Dualex
SHORT MANUAL
Version 1.2, 08/2024
Thank you for choosing Dualex by METOS. Dualex is a hand-held leaf-
clip that combines the use of fluorescence and light transmission
through a leaf to determine a plant's physiological state.
Dualex measures leaf chlorophyll content and indices for flavonol and
anthocyanin. Chlorophyll is measured using light transmittance at dif-
ferent wavelengths (FR and NIR), while flavonol and anthocyanin meas-
urements are based on chlorophyll excitation at different wavelengths
in the visible and UV light spectrum.
Pessl Instruments GmbH
Werksweg 107, 8160 Weiz, Austria
office@metos.at
+43 317 255 21

Advertisement

loading
Need help?

Need help?

Do you have a question about the METOS Dualex and is the answer not in the manual?

Questions and answers

Summary of Contents for Pessl Instruments METOS Dualex

  • Page 1 Chlorophyll is measured using light transmittance at dif- ferent wavelengths (FR and NIR), while flavonol and anthocyanin meas- urements are based on chlorophyll excitation at different wavelengths in the visible and UV light spectrum. Pessl Instruments GmbH Werksweg 107, 8160 Weiz, Austria office@metos.at +43 317 255 21...
  • Page 2 START-UP DUALEX Unpack the device and check for any physical damage. If found, contact Pessl Instruments immediately. The device is pre-charged but may need recharging depending on stor- age and delivery time. This can be done using the USB cable, either directly from a computer...
  • Page 3 TAKING A MEASUREMENT To start, press the power button. A beep and the Pessl Logo appear, followed by the main menu. Select “Measurement” and confirm with the “OK” button. Ensure no leaf is clipped between the heads, then press “OK” again Open the clip and place the intended leaf between the heads to take a measurement.
  • Page 4 CLEANING The Dualex should be cleaned regularly using a tissue slightly mois- tened with a mixture of water and alcohol. The optical parts of the device must be carefully cleaned by blowing clean and dry air, followed by wiping with a cotton swab slightly moistened with ethanol. For full user manual please visit: metos.global/manuals Visit...