Installation; Location - Currys Essentials CID45B16 Installation Instructions Manual

INSTALLATION

Location

When selecting a position for your dishwasher
you should make sure the installation surface
is flat and firm, and the room is well ventilated.
Avoid locating your dishwasher near a heat
source, e.g. cooker, boiler or radiator. Extreme
cold ambient temperatures may also cause
the appliance not to perform properly. This
dishwasher is not designed for use in a garage
or outdoor installation.
Do not drape the dishwasher with any covering.
When installing, ensure that free space is left at
the sides.
All parts removed must be saved to
do the reinstallation in the future.
Ensure the dishwasher is unplugged
and empty. We recommend that 2
people handle the dishwasher during
installation.
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required.
The supplied door template also
contains installation steps which will
assist installation.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement
for servicing when required. The height
of the unit is 815 mm. The figure outlines
the minimum dimensions required to
accommodate the dishwasher within fitted
kitchen furniture units.
This product has been wet tested to ensure correct operation. As a result some
water may remain inside the unit. This is normal and safe. Remove any water
droplets from the exterior if necessary.
8
820 580
450
units in mm
550
815
448