Page 1
INSTRUCTION MANUAL IMPORTANT: READ THIS INSTRUCTION CAREFULLY BEFORE PROCEEDING. This manual will provide you with clear and detailed instructions on how to safely and correctly assemble and maintain your Vienna, to ensure it brings you enjoyment. FOLLOW US ON @abbapatio...
P A R T S L I S T Tool required, Make sure all parts listed below have been included in your package. not included PART NAME Main body Lower pole Sliding sleeve Protective cap Rotator Cross base (top) Cross base (bottom) Socket head cap screw M8x20mm...
Page 3
A S S E M B L Y 1. Cross base assembly 1A) Insert the cross base (top) into the slot of the cross base (bottom) 1B) Fix the rotator to the cross base with socket head cap screw 2. Sliding sleeve assembly 2A) Secure the sliding sleeve to the main body with phillips pan head screw...
O P E R A T I N G 1. Stabilize the base 1A) Secure umbrella in at least a 150lbs umbrella base. 1B) Fasten the umbrella to the deck with wood screw provided. 2. Open the umbrella Open 2B) Hold the slide sleeve and press the handle, push up to the 2A) Open the bind.
4. Horizontal tilt 4A) Press the button while grabbing the end cap with the other hand to swing it from side to side to adjust the angle. 5. 360°Rotation 5A) Step on the foot pedal and turn the pole with one hand for 360°rotation until it is adjusted to the desired direction. 6.
Need help?
Do you have a question about the VIENNA and is the answer not in the manual?
Questions and answers