Sony DRN-XM01C Operating Instructions page 2

Parts and Identifications Adjusting the Time Difference
This unit displays the current time by correcting the time difference
Main unit
between the local time and UTC (coordinated universal time) data being
JOG roller (MENU/ENTER) transmitted. Set the "hour" of your local time in the menu display. The
factory-set is the eastern standard time.
If the current UTC data is not received, "– – : – –" appears in the display.
1
Press POWER to turn on the main unit.
Cradle
2
Press JOG roller (or MENU on the remote) to show the
release
button menu display.
Display window
The first menu item appears.
Cradle release button
DSPL/BACK
MEMO
3
Turn JOG roller (or press X ⁄ x on the remote) to select
Preset buttons (1-5)*
"TIME ADJUST" and press JOG roller (or ENTER on the
POWER*
remote).
The "hour" flashes.
Remote sensor
* The POWER and preset button No. 3 have a tactile dot.
Remote commander
12:00 AM = midnight
* 12:00 PM = noon
4
Turn JOG roller (or press X ⁄ x on the remote) to adjust the
hour and press JOG roller (or ENTER on the remote).
MEMO POWER
The display returns to the tuned channel display.
*
Note
This unit does not have the Daylight Saving Time (summer time)
function.
BACK ENTER
To check the current time while listening to a
DSPL MENU
broadcast
1 2 3
Press DSPL/BACK (or DSPL on the remote) until the "
Preset buttons
display appears. See "Checking the Tuned Channel Information".
4 5
To cancel a selection
Press DSPL/BACK (or BACK on the remote) to return to the previous
display during menu operation.
* The X and POWER button have a tactile dot.
Press MENU on the remote commander to exit the menu display. The
display returns to the tuned channel display.
Using the JOG Roller (MENU/
Playing the Receiver
ENTER)
Notes
Turn up or down to select channels,
• Turn down the volume of the component connected to the unit before
select the menu items and settings, or
playing the unit.
scroll the stored text information in
• Adjust the volume of the component connected to the unit.
the menu operation.
• If sound distortion occurs when playing the unit with the cassette
adaptor, adjust the Line Out Level. See "Using Other Functions".
Manual Tuning
Press to display the menu display, or
1
Make settings on your car audio or amplifier, etc. so that you
execute the items or settings in the
can listen to the sound from this unit.
menu operation.
2
Press POWER to turn on the main unit.
The channel that you last tuned in to is displayed.
Displaying the Radio ID
3
Turn JOG roller (or press X ⁄ x on the remote) to select
desired channel.
The receiver has its own ID, and an ID number is required when
registering in XM.
• Holding down X ⁄ x makes the channel readout to rapidly increase or
decrease respectively.
1
Press POWER to turn on the main unit.
• This unit has two scroll modes: Channel Scroll and Category Scroll. See
2
Turn JOG roller (or press X ⁄ x on the remote) to select "Using the Category Scrolls".
Channel Scroll: searches for a channel by scrolling every single channel
" CH0 RADIO ID".
among authorized channels.
The radio ID appears.
Category Scroll: searches for a channel using the Channel Category you
selected in the menu display.
Radio ID
To turn off the receiver
Note
Press POWER.
The Radio ID can be displayed only in Channel Scroll mode. See "Playing
the Receiver".
Using the Category Scrolls
In Category Scroll mode, you can search for a channel among authorized
channels that have the corresponding Channel Category you selected in
the menu display.
1
Press JOG roller (or MENU on the remote) to show the
menu display.
"SCROLL MODE" appears in the display.
2
Press JOG roller (or MENU on the remote).
The current scroll mode appears in the display.
Menu icon
3 Turn JOG roller (or press X ⁄ x on the remote) to select
Menu item
"CATEGORY SCROLL" and press JOG roller (or ENTER on
the remote).
The selected Channel Category appears in the display.
4
Turn JOG roller (or press X ⁄ x on the remote) to select the
desired Channel Category and press JOG roller (or ENTER
on the remote).
The unit searches for a channel that has the selected Channel Category
from the Channel Number next to the current channel.
The CATEGORY indicator appears in the upper left corner of the
display.
To cancel a selection
Press DSPL/BACK (or BACK on the remote) to return to the previous
display during menu operation.
Press MENU on the remote commander to exit the menu display. The
display returns to the tuned channel display.
Tips
" and " "
• When you tune in to a channel in Category Scroll mode, the Channel
Category appears for about 2 seconds in the display.
Channel Category
• When there is no channel that has the specified Channel Category,
"--------" is displayed.
Note
When the Category list cannot be received depending on the receiving
condition, "--------" is displayed in step 3 above, and you cannot select the
Channel Category.
Presetting your Favorite
Channels
Preset Tuning
You can preset up to 5 channels onto the preset buttons (1–5). To access
the preset channels, simply press the corresponding preset buttons (1–5).
All the preset buttons are preset to Channel Number 1 at the factory.
Presetting a channel
1
Follow steps 1 to 3 in "Playing the Receiver", and manually
Channel Number
tune in to the channel you wish to preset.
Channel Name
2
Hold down the preset button on the unit for more than 2
seconds.
The preset number appears.
Preset number
The previous preset channel is deleted and the unit presets the
channel being received.
Note
You cannot preset channels using the remote.
Tuning in to a preset channel
1
Press POWER to turn on the main unit.
2
Press the desired preset button (1–5).
Checking the Tuned Channel Using other Functions
Information
You can also use the following functions in the menu display.
This unit has three display modes in the tuned channel display.
Menu
1 Scroll mode
Press DSPL/BACK (or DSPL on the remote).
Memo
The display mode changes as follows:
Back Light
Channel Number
Beep
Channel Name
Time Adjust
Contrast
Artist Name/Feature
Auto Power Down
Song/Program Title
Line Out Level
Additional Information
To cancel a selection
Current time and date
Press DSPL/BACK (or BACK on the remote) to return to the previous
display.
Tips
Press MENU on the remote commander to exit the menu display.
• When the Additional Information text has more than 16 characters, text
will be scrolled every 2 seconds.
Note
After all Additional Information is displayed, "--- + --- + --- + --- +"
When no operation is performed for about 1 minute in the menu display,
appears for about 2 seconds and then repeats displaying from the
the unit cancels a selection and the display returns to the tuned channel
beginning.
display.
• As the unit memorizes the display mode when the power is turned off,
the display appears in the last display mode when you turn on the unit.
Back Light
Note
If the channel has no text information, "--------" will appear in the display.
You can select the lighting level of the display window. The factory-set is
"BRIGHT".
Storing the Information
1
Press JOG roller (or MENU on the remote) to show the
menu display.
You can store the text information contained in the tuned-in channel. This
2
Turn JOG roller (or press X ⁄ x on the remote) to select
unit can store ten sets of the following information:
"BACK LIGHT" and press JOG roller (or ENTER on the
– Channel Number
– Channel Name
remote).
– Artist Name or Feature
The current setting appears in the display.
– Song or Program Title
– Additional Information and time/date
Note
When you store the eleventh set of information, the oldest one will be 3
Turn JOG roller (or press X ⁄ x on the remote) to select the
deleted.
desired setting and press JOG roller (or ENTER on the
1
Press MEMO when the channel you wish to store the remote).
information is received. BRIGHT: makes the display window bright.
DIM: makes the display window dim.
"MEMORIZED" appears for about 2 seconds and the information is
OFF: turns off the lighting of the display window.
stored in "MEMO 1".
The memory numbers of already stored information increases by one.
Beep
You can turn the beep on or off. The factory-set is "ON".
1
Viewing the stored information Press JOG roller (or MENU on the remote) to show the
menu display.
1
Press JOG roller (or MENU on the remote) to show the
2
Turn JOG roller (or press X ⁄ x on the remote) to select
menu display.
"BEEP" and press JOG roller (or ENTER on the remote).
2
Turn JOG roller (or press X ⁄ x on the remote) to select
The current setting appears in the display.
"MEMO" and press JOG roller (or ENTER on the remote).
Memory number 3
Turn JOG roller (or press X ⁄ x on the remote) to select
"ON" or "OFF" and press JOG roller (or ENTER on the
If no information is stored, "NO MEMO" will appear.
3
Turn JOG roller (or press X ⁄ x on the remote) to select the
remote).
desired memory number and press JOG roller (or ENTER
on the remote).
4
Turn JOG roller (or press X ⁄ x on the remote) to scroll the
stored text information.
The information appears in the following order: Artist Name/Feature
t Song/Program Title t Additional Information t Channel
Number t Channel Name t Time and date.
To return to the display for selecting the
memory number
Press DSPL/BACK (or BACK on the remote).
To exit the menu display
Press MENU on the remote commander. The display returns to the tuned
channel display.
Contrast
You can adjust the contrast of the display window in 8 levels. The factory-
set is level 4.
1
Press JOG roller (or MENU on the remote) to show the
See
menu display.
"Using the Category Scroll"
2 Turn JOG roller (or press X ⁄ x on the remote) to select
"Storing the Information"
"CONTRAST" and press JOG roller (or ENTER on the
below
remote).
below
The current setting appears in the display.
"Adjusting the Time Difference"
below
below
below 3
Turn JOG roller (or press X ⁄ x on the remote) to adjust
contrast while checking the display and press JOG roller (or
ENTER on the remote).
Auto Power Down
Auto Power Down function automatically turns off the unit when the
specified time passes from the last button operation. The factory-set is "60
min".
1
Press JOG roller (or MENU on the remote) to show the
menu display.
2
Turn JOG roller (or press X ⁄ x on the remote) to select
"AUTO POWER DOWN" and press JOG roller (or ENTER
on the remote).
The current setting appears in the display.
3
Turn JOG roller (or press X ⁄ x on the remote) to select
setting and press JOG roller (or ENTER on the remote).
The setting changes as follows:
OFF 60 min 120 min 180 min
When you select a setting other than "OFF", the Auto Power Down
indicator appears in the lower left corner of the display. To disable the
Auto Power Down function, select "OFF."
When the specified time passes, the following messages appear in the
display.
2 seconds
When no button is pressed, the unit turns off the power. If you press
any button, the timer duration will begin from the start.
Line Out Level
You can adjust the output level of the signal from the LINE OUT jack in 8
levels. The factory-set is level 8 (Maximum.).
Standard level adjustment
• When the car connecting pack is connected to the LINE OUT jack of the
unit and using it in a car, turn down the Line Out Level to avoid sound
distortion.
• When the car connecting pack is not connected to the LINE OUT jack,
set the Line Out Level to the maximum level.
1
Press JOG roller (or MENU on the remote) to show the
menu display.
2
Turn JOG roller (or press X ⁄ x on the remote) to select
"LINE OUT LEVEL" and press JOG roller (or ENTER on the
remote).
The current setting appears in the display.
3
Turn JOG roller (or press X ⁄ x on the remote) to adjust the
Line Out Level while listening to the radio and press JOG
roller (or ENTER on the remote).