Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Loopcomm LP-9698SR
Summary of Contents for Loopcomm LP-9698SR
- Page 1 High Power Wireless‐N 600mW Smart Repeater LP‐9698SR ...
-
Page 2: Table Of Contents
INTRODUCTION ......................4 GETTING STARTED......................5 Package Contents ....................5 LED Indicators......................6 Back Panel Description..................7 SETUP GUIDE .........................8 Find a Setup Location ....................8 Connect your PC to the Smart Repeater ..............9 Open your Web Browser to Access the Setup Wizard........10 Welcome to the Smart Setup Wizard ..............11 Scan for a Wireless Network................12 Connecting to a Secure Network ................13 Repeater Settings (SSID) ..................14 Repeater Settings (Security) ................15 Setup Summary ....................16 WIRELESS SETTINGS ....................18 Home Network Settings ..................18 Extended Network Settings ................19 Guest Network ....................20 Wireless Settings: Security..................21 Wireless Settings: Wi‐Fi Protected Setup (WPS)..........23 Wireless Settings: Advanced Settings ..............24 SMART FEATURES......................26 Wireless Settings: Access Schedule ..............27 Wireless Settings: User Access Control ..............28 ... - Page 3 Troubleshooting ....................42 ...
-
Page 4: Introduction
INTRODUCTION Thank you for purchasing this Loopcomm Technology product. At Loopcomm Technology we strive to provide you with the highest quality products through innovation and advanced technology. We pride ourselves on delivering products that outperform the competition and go beyond your expectations. If you have any questions please feel free to contact us. We’d love to hear from you and thank you for your support! Web: www.loopcomm.com ... -
Page 5: Getting Started
GETTING STARTED Package Contents Check to make sure you have all the contents within your package: High Power Smart Repeater Two Detachable 7dBi High Gain Antennas RJ‐45 Ethernet Cable Setup Guide CD: User’s Manual Vertical Mounting Base ... -
Page 6: Led Indicators
LED Indicators (From Top to Bottom) Power: Indicates when the High Power Smart Repeater is powered on. The LED will stay lit when power adapter is plugged into repeater. Wireless Activity: Blinks rapidly when wireless data traffic is passing through the Smart Repeater. When there is a problem with the Wi‐Fi connection this LED will remain off or blink steadily. Wired Devices (1‐5): Indicates when a networking device is connected to a wired port on the back of the High Power Smart Repeater. The LED blinks rapidly when wired data traffic is transmitted or received. WPS: Wi‐Fi Protected Setup activity. When the WPS mode is activated the WPS LED blinks as it awaits a connection. ... -
Page 7: Back Panel Description
Back Panel Description Antenna Connectors (1‐2): RP‐SMA antenna connectors. Compatible with all antennas that have RP‐SMA connectors. Upgradable to high gain antennas for more range. Reset: Push down once to reboot the High Power Repeater. Hold down for 5‐10 seconds to reset the repeater back to factory settings. WPS: Hold down for 3 seconds to enable WPS push button configuration. Wired Devices: RJ‐45 ports for connecting wired computers or network devices. Power: Power adapter port. DC 12V 1A. ... -
Page 8: Setup Guide
SETUP GUIDE Find a Setup Location The location of where you install the Smart Repeater is very important to how it will function. The optimal setup location should be somewhere no more than halfway between your wireless router and your wireless dead zone. ... -
Page 9: Connect Your Pc To The Smart Repeater
Connect your PC to the Smart Repeater Connect the two included high gain antennas by screwing them into the antenna connectors. Use the included Ethernet cable to connect one end into any Wired Port on the Smart Repeater and use the other end to connect to the network port on your laptop or desktop computer. Connect the power adapter to the power port on the back of the Smart Repeater. *Do NOT attempt to connect to the Smart Repeater with a wireless connection at this time. ... -
Page 10: Open Your Web Browser To Access The Setup Wizard
Open your Web Browser to Access the Setup Wizard Open your web browser. Type in: http://setup.loopcomm.com into the web address ba If the web menu fails to open, type in the following IP address into your web address bar: http://192.168.1.250 Disconnect your PC from all wireless networks, open your browser and try again. If you continue to have problems accessing the Web Menu, disconnect the cable from your computer to the Repeater. Connect wirelessly (SSID: Loopcomm_Repeater and Password: loopcommwifi) and try again. ... -
Page 11: Welcome To The Smart Setup Wizard
Welcome to the Smart Setup Wizard When the web menu appears, click Next to proceed with the Smart Setup Wizard. The diagram on this page displays the terms used to describe: 1) The network you are trying to repeat (Home Network). 2) The network that is rebroadcasted and extended (Extended Network). Study this diagram carefully as the terms used in the following instructions will refer to these names. ... -
Page 12: Scan For A Wireless Network
Scan for a Wireless Network Click SCAN to begin searching for available wireless networks to repeat. Highlight your network and click Next to continue. Check that your Wireless Network has a signal strength of 70% or greater. If you fail to find any wireless networks, or your signal strength is below 70%, the Smart Repeater may be placed too far from the wireless network that you are trying to repeat. Move your Smart Repeater closer to the wireless network that you are trying to repeat and click SCAN again. The Scan results page will display information regarding the name of the network (SSID), the channel which the wireless network is operating on and the type of network that it is. AP stands for Access Point and is the standard type of wireless network. The results page will also display whether or not your network has security and what the signal strength is coming from each specific network detected. ... -
Page 13: Connecting To A Secure Network
Connecting to a Secure Network If the wireless network you are trying to repeat has wireless security enabled, you will be prompted to enter a security key. If you did not select a secure network, continue to the next step. Enter the security key in the space provided. You do not need to select what type of security it is, just simply type in the key and click Next. The Smart Setup Wizard will automatically detect your home network’s security settings. If you do not know the key to the network you are trying to repeat, then click back and select another network ... -
Page 14: Repeater Settings (Ssid)
Repeater Settings (SSID) The default SSID of the Smart Repeater is “Loopcomm_Repeater” This SSID for the Extended Network may be changed by adjusting the name in the field for the Extended Wireless Network ID. This ID will be used by wireless users connecting to the Smart Repeater to identify the Smart Repeater’s Extended Network. It is recommended to use the default settings. ... -
Page 15: Repeater Settings (Security)
Repeater Settings (Security) By default, the Extended Network has security enabled. The WPA security key is “loopcommwifi” Users trying to connect to the Smart Repeater wirelessly will be prompted to enter this key. It is recommended that you use the default settings for the wireless security key. To change the security key, simply retype your new key in the field and click Next. Write your security key down somewhere safe for future reference. No security key is necessary for computers connecting to the Smart Repeater using a wired connection to the LAN ports. After clicking Next, the Smart Repeater will reboot and apply your settings. Be patient and do not make any changes or adjustments to the Smart Repeater at this time. ... -
Page 16: Setup Summary
Setup Summary Once the Smart Repeater has rebooted, it will load the Setup Summary page and provide you with the details of your setup. At this time, you may disconnect from the Smart Repeater and start a wireless connection. If you have any wired devices that you would like to attach to the Smart Repeater, you may do so now as well. Enjoy your Extended network! ... - Page 17 If the Home/Office Network connection fails try the following… Check to see that your Home Network security settings are correct. Check on the SCAN page that your Home Network is showing a signal of 70% or greater. If not, move the Smart Repeater closer to your Home Network router and try again. Check that your Home Network router’s DHCP server is enabled. Try changing the channel of the Home Network router to a higher channel number (5‐11) and run the Setup Wizard again. If possible, check the Internet connection for your Home Network wireless router. Connect directly to your Home Network wireless router. If you are unable to access the internet through the Home Network wireless router, you must first fix this problem. The Smart Repeater will not be able to obtain internet access through a router that does not have internet access. Once Internet access is restored, connect to the Smart Repeater again and retry the Smart Setup Wizard. Return to the Smart Setup Wizard and attempt to connect to another Home Network known to have Internet access. Try to reboot (unplug the power from the Smart Repeater and plug it back in) the Smart Repeater and check to see if the connection is established (some networks may be very slow and take longer than the allotted time for the Smart Repeater to successfully connect). ...
-
Page 18: Wireless Settings
WIRELESS SETTINGS Home Network Settings The Home Network Settings page allows you to adjust settings for your Home Network connection. These settings are for adjusting the Smart Repeater after you have already gone through the Smart Setup Wizard and wish to adjust your current configurations. item Description Home Network Manually enter the Identification name of the SSID Home Network you wish to connect to. Channel Number Enter the channel number of the Home Network. If the channel number does not match, a connection will not be established. Channel Width Wi‐Fi operates in two separate channel widths, 20Hz and 40Hz. 20Hz allows operation on channels 1‐11, while 40Hz is 5‐ 11. 40Hz allows for faster speeds. Select the channel width you wish to use for your network. This setting must match that of your Home Network for a successful connection. ... -
Page 19: Extended Network Settings
Extended Network Settings The Extended Network Settings page allows you to adjust settings for your Extended Network. Band: Allows you to setup access under a specific combination of Wi‐Fi speed standards. Item Description Band Select the compatible Wi‐Fi standard and speed for your wireless network. Broadcast SSID Selecting Disable Broadcast SSID will hide the visibility of the repeater’s SSID. Users must manually enter the SSID to connect. Data Rate You can restrict access to the Guest Network by setting a lower bandwidth by changing the band (i.e. only allow 802.11b access to specific users). SSID of Extended Click “Guest Network” to create a SSID for guests. Network Associated Clients View all computers and network devices that are connected to your Guest Network wirelessly. ... -
Page 20: Guest Network
Guest Network Click “Enable” to create a Guest Network. Guest Networks provide a separate wireless network, with unique settings for users to connect to. SSID: This is the name of your Guest Network. To set security settings for the Guest Network go to: Wireless Settings > Security. ... -
Page 21: Wireless Settings: Security
Wireless Settings: Security Wireless security allows you to change the type of wireless security settings for your Extended Network or your Home Network. Item Description Encryption Enables the use of Microsoft Point‐to‐Point Encryption (MPPE). Authentication While Encryption is selected to be WPA. Click to select the WPA Authentication Mode Mode with Enterprise (RADIUS) or Personal (Pre‐Shared Key). WPA Cipher Suite A medium level encryption and is supported by most wireless devices and operating systems. WPA2 Cipher Suite A high level encryption and is supported by most wireless devices and operating systems. While Encryption is selected to be WPA. Select the Pre‐shared key format from Pre‐Shared Key the pull‐down menu. The format can be Passphrase or Hex (64 characters). Format [WPA, Personal(Pre‐Shared Key) only] Pre‐Shared Key WEP: When you select WEP, please input 5, 13 (ASCII), 10 or 26 (HEX) characters for WEP Key. ... - Page 22 Note: If you adjust the security in your Home Network and it is incorrect, you will no longer have a successful connection to your Home Network. Using the drop down menu, you can select which network you wish to configure and may adjust the security settings below. If you are using the Multiple AP/SSID feature, you will be able to adjust the security settings for your additional SSIDs here as well. For more information on the differences between the types of Wi‐Fi security available, please check the Learning Center of the Loopcomm Technology website: setup.loopcomm.com ...
-
Page 23: Wireless Settings: Wi-Fi Protected Setup (Wps)
Wireless Settings: Wi‐Fi Protected Setup (WPS) item Description Option A Push button: You may push the WPS button on the web menu or use the physical button on the back of the High Power Router. Option B PIN: Some wireless devices use PIN number to access wireless network. If your wireless device requests for a PIN number, use the PIN code located here. Option C Enter PIN: Some wireless devices require that you use a PIN number to add them to the wireless network. If your wireless device has a PIN number locates the number and enter in the field, then press Start Pin. WPS is a Wi‐Fi feature created to make Wi‐Fi setup simple and easy. Some wireless routers and adapters support this feature with varying names (i.e. one touch setup or WPS). You may enable WPS setup here by selecting the type of WPS setup you wish to use. The Smart Repeater supports all types of WPS setup: Push button: You may push the WPS button on the web menu or use the physical button on the back of the Smart Repeater. ... -
Page 24: Wireless Settings: Advanced Settings
Wireless Settings: Advanced Settings It is recommended that only experts in Wi‐Fi configuration adjust the advanced wireless settings for the Smart Repeater. These settings allow you to control the details of your wireless network configuration. ... - Page 25 Here are a few definitions on some settings. Item Description Fragment The Default and Recommended setting is at 2346, meaning the Threshold High Power Repeater will never fragment any frames that it sends to wireless users. RTS Threshold Adjusts the size of RTS data packets. Lower values reduce throughput, but allow the system to recover quicker from interference/collisions. Higher values provide the fastest throughput. Beacon Interval Indicates the frequency interval of the beacon. A beacon is a packet broadcast by the repeater to sync the wireless network Preamble Type Defines the length of the Cyclic Redundancy Check for communication between the repeater and roaming wireless users. IAPP Inter‐Access Point Protocol Protection ...
-
Page 26: Smart Features
SMART FEATURES The Smart Repeater provides your Extended Network with Smart Features that help to provide convenience and protection for your Extended Network. Smart Features allow you to control access to your Extended Network through on/off schedules, specific user authorizations as well as through the size of your wireless coverage for your Extended Network. These settings are ONLY for your Extended Network and do not apply to your Home Network. ... -
Page 27: Wireless Settings: Access Schedule
Wireless Settings: Access Schedule You can set a schedule for when your Wi‐Fi is enabled or disabled (both Home Network and the Extended Network) through the Access Schedule feature. To do so: a. Enable Access Schedule. b. Select which days you wish for your Wi‐Fi to be available. c. Select the time frame during that day that you wish for Wi‐Fi to be available. d. Apply Changes. Enabling Access Schedule will also disable internet access for wired connections on specified days. Note: Make sure you have already configured your System Clock in order for your schedule to work correctly. Time Zone Settings can be adjusted from the web menu under Management > Time Zone Settings. ... -
Page 28: Wireless Settings: User Access Control
Wireless Settings: User Access Control User Access allows you to deny access or allow access to specific users connecting wirelessly to the Extended Network. Each networking device has a unique address called a MAC address (a 12 digit hex number). By inputting the MAC address into the field, you can define whether that device is allowed into your network or not allowed. ... -
Page 29: Wireless Settings: Wireless Coverage Controls
Wireless Settings: Wireless Coverage Controls Adjust the output power of the Smart Repeater to control the coverage distance of your Extended Wireless Network. For a smaller coverage area you can select a lower output power. For the maximum wireless coverage select the 100% selection. Note that if you select a lower output power, your connection to your Home Network will also decrease in range. So be careful and test your signal strength after each adjustment ... -
Page 30: Ip Settings
IP SETTINGS Item Description IP Address The IP address of the Smart Repeater. Subnet Mask: The subnet of the Smart Repeater. Subnet Mask The subnet of the High Power Router. Default Gateway The access points to another network, normally the Smart Repeater or your router. DHCP The Smart Repeater includes a complex AUTO DHCP feature to help manage the IP addresses within your Extended network and with your Home Network. When connected to a Home Network, the Repeater will obtain an IP address from your Home Network’s router and act as a DHCP Client. However, when there is no connection available, the Repeater will act as a DHCP Server. You may also manually control the IP settings of the Smart Repeater by choosing Client, Server or Disabled from the DHCP drop down menu. This is only for advanced users. ... - Page 31 DHCP Client Range The range of IP addresses the Smart Repeater’s DHCP server will assign to users and devices connecting to the Smart Repeater Static DHCP You may set a static IP address within your DHCP network. The Smart Repeater will track the device via its MAC address and assign it a pre‐defined IP address each time the device logs into the network. Obtain IP settings from the Home router or manually enter your IP settings. Auto‐Load Menu When the Smart Repeater loses connection to your Home Network it will (Auto‐DNS) automatically redirect your web browser to the web menu. To turn this feature off, you can disable Auto‐DNS. Note: Disabling Auto‐DNS will require that you access the web menu using the IP address of this device. It is recommended that you note your IP address before changing this mode. If you are no longer able to access the web menu, you will need to perform a hardware reset. Domain Name The Domain Name allows you to change the URL which is used to access the Setup Menu for the Smart Repeater. For example, entering http://setup.loopcomm.com into your web browser while connected to the Smart Repeater, will guide you to the Web menu for the Smart Repeater. By changing the Domain Name, you will change the URL entered to access the Web menu. If you forget the Domain Name you entered and can no longer access the Web menu, then you will need to reset your Smart Repeater to default settings by holding down the reset button on the back panel for 5‐10 seconds. 802.1d Spanning A network protocol that ensures a loop‐free topology for networks that have Type Ethernet bridges. The STP prevents bridge loops and allows a network design to include redundant links to provide automatic backup paths if active links fails. Clone Mac address The High Power Router can use a Mac address that you define as its own. This is often used when an Internet Provider only authorizes one Mac address to access the Internet. Cloning the MAC address will make it so that the cloned Mac address is the only MAC address seen by the Internet provider. ...
-
Page 32: Management Features
MANAGEMENT FEATURES The Management features on the Smart Repeater allow you to view the status of your Smart Repeater and adjust other settings such as your System Clock, Passwords, and Firmware Upgrades among other administrative functions. Management: System Status The System Status provides you with a snapshot of your Smart Repeater’s current connections and settings. The Current Date / Time is the setting for the system clock. If this time is off, go to the System Clock section and configure your system time. Item Description System This section provides you with information on the version and the build time of Information your firmware. This is used to help our support department determine what firmware version your device is running. Home Wireless This section displays the current status of the connection between the High Network Settings Power Smart Repeater and your Home Network. When viewing this section it is important to check that your Home Network SSID is correct, that the channel number matches your Home Network's channel number settings. ... - Page 33 Connection State: The Connection State will say "Connected" when there are no problems with the connection to your Home Network. If the Connection State shows "Waiting for Keys" then the WPA/WPA2 security key you entered is incorrect. If the Connection State shows "Scanning" the Smart Repeater may be too far away from your home/office router. The Signal Strength display can be updated by refreshing the page and is a good tool to use for finding the optimal installation location. A signal strength of 70% or greater is recommended for stable operation of the High Power Smart Repeater. Item Description Extended Wireless Shows the current settings for your Extended Wireless Network. Network Settings Smart Repeater IP The network IP settings for your High Power Smart Repeater will change as you Settings connect and disconnect from your Home Network. When connected to your Home Network, the network IP settings will be assigned by your Home Network. When not connected, the High Power Smart Repeater will use its own default network IP settings. ...
-
Page 34: Management: Statistics
Management: Statistics These statistics show the data activity for each network connection. Description Item Connection to This statistics shows the data activity for all upload and download data between Home Network the Home Network and the Smart Repeater. Extended Wireless These statistics shows all data activity for all users connected wirelessly to the Network Smart Repeater. Extended Wired The Wired Connection statistics shows all data activity for all users physically Network connected to the wired ports on the Smart Repeater. ... -
Page 35: Management: System Clock
Management: System Clock Maintain the internal clock for the Smart Repeater by syncing with your computer’s time. Your system clock settings need to be accurate in order for logs and wireless access schedules to work correctly. ... -
Page 36: Management: System Logs
Management: System Logs System Logs are useful for viewing the activity and history of the repeater. The System Logs are also used by Loopcomm Technology techs to help troubleshoot your repeater when needed. It is recommended that you enable all logs in the event that troubleshooting is required. All log entries are deleted each time the repeater reboots or is powered off. ... -
Page 37: Management: Upgrade Firmware
Management: Upgrade Firmware Loopcomm Technology continuously updates the firmware for all products in an effort to constantly improve our products and their user experiences. Check the Downloads page for your product frequently to see if there are any updates. The firmware update is downloaded as a zip file from the Support Webpage link on the left. You will need to have an unzipping program to open the file. Inside the file will be a text document with details on the current firmware release and instructions on how to upgrade the firmware. To manually upgrade your firmware: a. Download the file from the www.loopcomm.com/support website and remember the location where you saved it. Firmware files may also be provided by Loopcomm Technology support reps. b. Click Choose File and locate the file. c. Click Upload to begin upgrading. Note: Firmware files normally have a .bin file extension. ... -
Page 38: Management: Save And Reload Settings
Management: Save and Reload Settings Saving your current settings allows you to back‐up your current settings which may be reloaded at a later time. This feature may be useful for testing new features and settings without having to worry about returning to a stable platform. To save current settings: a. Click Save b. Select a file name and location To load previously saved settings: a. Click Browse b. Locate the previously saved settings file c. Click Upload to restore the settings to the saved file. You may also reset the Smart Repeater’s settings to factory settings by pressing Reset. By resetting the Smart Repeater you will lose all previous configurations and will need to run the Smart Setup Wizard again to reconnect to a Home Network. ... -
Page 39: Management: Password Settings
Management: Password Settings By default, the Smart Repeater does not require a password to login to the web menu. If you wish to enable a password to protect unauthorized access to the web menu and Smart Setup Wizard, you may enter one here. Item Description New Login Fill in the user name to login New Password Fill in the user password to login Confirmed Check the password again. Password ... -
Page 40: Technical Specifications
TECHNICAL SPECIFICATIONS Wireless Standard: 802.11n, 802.11b/g Frequency Band: 2.4 GHz Wireless Speed: 300Mbps (Rx), 300Mbps (Tx) Amplifier: Dual 600mW High Power Amplifiers/Dual Low Noise Amplifiers Wireless Sensitivity: ‐95dBm Wireless Output Power: Up to 28dBm Wireless Security: WEP, WPA, WPA2, WPA Mixed, WPS Wireless Access Control: MAC address filtering Wireless Access Scheduling: Specific day and time Wireless Coverage Control: 15% ‐ 100% Output Power Antennas: 2 x Detachable High Gain 7dBi Antennas 2 x Reverse SMA Connector Ports: 5 x RJ‐45 10/100 LAN ports Mounting: Stand or Desktop Warranty: 1 Year Setup Requirements: Wired or wireless PC/Mac and an available 802.11b/g/n wireless network Google Chrome, Internet Explorer (8.0 and up) or Safari web browser ... -
Page 41: Default Settings
DEFAULT SETTINGS The default settings for your Smart Repeater are listed here. If for some reason you need to return your Smart Repeater back to default settings, hold down the Reset button on the back panel for 10 seconds. The Smart Repeater will reset back to factory settings as listed below: IP Address: 192.168.1.250 Web Menu Access: http://setup.loopcomm.com SSID: Loopcomm_Repeater Security Key (WPA2/WPA/AES): loopcommwifi ... -
Page 42: Troubleshooting And Support Information
TROUBLESHOOTING AND SUPPORT INFORMATION We are here to help. If you have any issues with your Smart Repeater please contact us. To contact Loopcomm Technology’ Technical Support use one of the following methods: Web: www.loopcomm.com/support Troubleshooting The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b), etc. I entered setup.loopcomm.com and it failed to open the Web Menu. Make sure your computer is connected to the Smart Repeater using the included Ethernet cable. Do not try to connect with a wireless connection. Ensure that the power on the Smart Repeater is on. Make sure your computer is NOT connected to any wireless networks. If it is, disconnect and try again. Try to use a different web browser. We recommend the Google Chrome web browser. Try to open your web browser to the default IP address by putting this number into your web browser instead: 192.168.1.250 Power off (unplug the power adapter) the Smart Repeater and power it back on. Try again. Reset your Smart Repeater to default settings by holding the Reset Button (located on the back panel) for ten (10) seconds and try again. I cannot connect to my Home Network. I received an Error when running the Smart Setup Wizard. Your Home Network may be secured. Double check that you have the correct security key to connect to the Home Network. Your Smart Repeater may be located too far from your Home Network. Run through the Setup Wizard again. On the SCAN page, your Home Network should show a signal strength of 70% or greater. If it does not, move the Smart Repeater closer to your Home Network and try again. Check to see that your Home Network router’s DHCP server is enabled. The Smart Repeater needs to obtain an IP from your Home Network router. ... - Page 43 1. The Smart Repeater may be out of range. Move the Smart Repeater closer towards the wireless router and try the Setup Wizard again from the Web Menu. It is recommended that your Home Network shows a signal strength of 70% or greater in the Smart Setup Wizard SCAN results. 2. The Home Network may be a dual band wireless router. The Smart Repeater supports 802.11b/g/n 2.4GHz routers. If your Home Network uses a dual‐band router, it will not work with the Smart Repeater. Adjust the dual‐band router’s configuration to disable the 5GHz band. 3. Go to the Smart Features tab in the web menu and access the Wireless Coverage Controls. Make sure the setting is at 100% and try again. 4. Make sure that your Home Network’s wireless SSID is broadcasting and not hidden. If your Home Network SSID is hidden, you will need to manually setup the Smart Repeater through the Wireless Settings > Home Network Settings menu. My Smart Repeater was working fine previously but now I can no longer access the Internet through the Smart Repeater. Or, I had a POWER OUTAGE and now the Smart Repeater no longer works. The connection to your Home Network has been dropped. This can be caused by several events to your home wireless connection. When this occurs you may rescan for another network by accessing http://setup.loopcomm.com to connect to and repeat or you may try to fix the issues with your Home Network and your home wireless router. Check to see that your home wireless router settings have not changed. Any changes to the SSID, security, or channel number from the original settings will disconnect the Smart Repeater’s connection to the home network. A power outage can cause a change in the channel of your router. To solve this simply run the Smart Setup Wizard again from the web menu and reconfigure your Home Network connection. You can also set a static channel number on your router to prevent this from happening again in the future. If you cannot access the setup menu, check to see that your Smart Repeater is still on. Reboot the Smart Repeater by unplugging the power adapter and plugging it back in. Check to see if your connection has been reestablished by viewing a website. If you do not have a connection, logon to http://setup.loopcomm.com and configure a new Home Network connection. ...
- Page 44 Check to see that your home wireless router is still on. If it has been turned off please turn it back on. The Smart Repeater should automatically reconnect to your Home Network within 10 minutes. I have a dual‐band router and I cannot repeat it. Log into the Web Menu for your dual‐band wireless router and adjust the wireless settings. Change the wireless band to 2.4GHz single band mode only. Disable the 5GHz wireless band. I cannot find any wireless networks (Home Networks) to repeat. The Smart Repeater may be out of range. Move the Smart Repeater closer towards the wireless router and try the Setup Wizard again from the Web Menu. The antenna on your Smart Repeater may be loose. Tighten the antenna connection and try again. The wireless Home Network may not be a compatible wireless network (802.11b/g/n). I am connected to a Home Network however I do not have Internet Access. The Home Network itself may not have Internet access. Check to see that you have internet access by connecting directly to the Home Network first. If you are able to go online then this is not a problem. If you cannot go online, then the Home Network’s Internet connection must first be resolved. You may have a DNS issue and the Smart Repeater is not obtaining the IP settings from your Home Network. Try to reboot the Smart Repeater and then accessing a website. If that fails, then reboot the Home Router to see if that fixes it. There may be an IP conflict with your Home Network and your Extended Network. Try to adjust the IP Settings of your Extended Network using IP values that are different from your Home Network. I can no longer connect to the Smart Repeater wirelessly. Power on and off the Smart Repeater and try again. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to the Smart Repeater. Access http://setup.loopcomm.com and run through the Smart Setup Wizard again. After you have successfully reset the Home Network connection, try connecting wirelessly again. ...
- Page 45 I could NEVER log onto the Smart Repeater wirelessly. Check that your wireless adapter supports WPA2 wireless security. If it does not then you will need to change the wireless security on the Smart Repeater. Go to the Web Menu, select Wireless Settings and then Wireless Security. Select the Extended Network from the drop down menu and either disable security or downgrade the security to WEP. Try connecting again. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to the Smart Repeater. Access http://setup.loopcomm.com and run through the Smart Setup Wizard again. After you have successfully reset the Home Network connection, try connecting wirelessly again. I can no longer access the Web Menu or the Smart Repeater no longer responds. Connect to your Smart Repeater and try to access http://setup.loopcomm.com using your web browser. If you are advanced in networking troubleshooting, log onto your home router’s web interface. Look for the DHCP client list and try to find the IP address of your Smart Repeater assigned by your home router. Once you have it, connect to the Smart Repeater using an Ethernet cable. Open your web browser and enter the IP address into the address bar. Reset the Smart Repeater back to default settings and try the Smart Setup Wizard again. To reset the Repeater back to default settings, push the Reset Button (on the back panel) down for five (5) to ten (10) seconds then let go. After the Smart Repeater has fully reset, use an Ethernet cable and connect to the Smart Repeater. Login to the Web Menu at http://setup.loopcomm.com and run through the Wizard. ...
- Page 46 The connection to the Home Network seems slow. File transfers take a long time to transfer. You may be too far away from your Home Network. The closer the Smart Repeater is to your Home Network, the better its connection will be. The Smart Repeater must have a strong signal in order to repeat the signal with fast speeds and further range. Move the Smart Repeater closer to your Home Network and try again. You may be downloading from the Internet and not within your Home Network or Extended Network. Files transferred through the Internet are limited by your ISP speed and the data download speeds from the website that you are downloading from. Your computer may be using an older Wi‐Fi adapter with lower speed limits (802.11b/g). The range from the Smart Repeater seems low. Check to see that your wireless output settings are at 100%. Go to the Web Menu, Wireless Settings and check the Advanced Settings. Make sure the output power is at 100%. Your Smart Repeater may be installed in a poor location. Avoid setting up your Smart Repeater in areas with high interference, such as, near fridges, microwaves, metallic objects and low surfaces. Install the Smart Repeater in a higher location if possible. Check the connections of the Antennas to the Smart Repeater. Tighten them if necessary. Adjust the Antennas of the Smart Repeater in different angles. My Wireless Access Schedule is being erratic and not working at the correct times. You need to adjust your Time Zone Settings from the Management Web Menu page. WiFi Protected Setup (WPS) is not working. Push button configuration does not detect the connection. The Smart Repeater supports WPS connections however some companies may use proprietary code for their own push button configurations. Try connecting using the Windows wireless utility or Mac wireless utility instead. ...
Need help?
Do you have a question about the LP-9698SR and is the answer not in the manual?
Questions and answers