Preparing Cables And Making Connection - Panasonic SC-BTT270 Owner's Manual

[BTT370] [BTT273]
Thread the speaker cable
through the base.
≥ Use cables with a white connector
and red connector.
Leave about
110 mm (4

Preparing cables and making connection

1
Use of the speaker cable stickers is
convenient when making cable connections.
e.g. Front speaker (L)
A Speaker cable sticker (supplied)
B Connector
Speaker cable sticker
1 FRONT (L)
2 FRONT (R)
3 SURROUND (L)
4 SURROUND (R)
5 CENTER
6 SUBWOOFER
Be sure to match the number on each sticker with the
connector color.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.
≥ Don't use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
≥ To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.
≥ Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.
[BTT770] [BTT370] [BTT273]
∫ Preventing the speakers from falling
≥ Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥ Use a string of less than ‰ 2.0 mm (
e.g., [BTT770]
11 / q)
32
Tighten securely.
FRONT
Lch
Color
WHITE
RED
BLUE
GRAY
GREEN
PURPLE
/ q), which is capable of supporting over 10 kg (22 lbs).
3
32
Insert the wire fully.
r: White
s: Blue line
Press into the groove.
Back of the base
Pull the cable
straight along the
line and slide into the
groove.
2
Connecting the speaker cables. Insert the
wire fully, taking care not to insert beyond
the wire insulation.
≥ [BTT770] Be sure to use the speaker cables that have a
large connector and short cable when you use the
wireless system.
e.g. Surround speaker
A String (not supplied)
Thread from the wall to the speaker and tie tightly.
B Rear of the speaker
C Screw eye (not supplied)
D Wall
E Approx.150 mm (5
29
Push!
r: White
s: Blue line
Push!
/
q)
32
VQT3D27
11