Fm Menu - Olympus WS-801 Detailed Instructions

• The recorder uses some of its memory
capacity to maintain a management
file. For a microSD card, the indicated
remaining capacity is less than the total
capacity of the card due to characteristics
of the microSD card, but this is not a
malfunction.
System Info.
You can check information about the
recorder on the menu screen. [ Model ]
(Model Name), [ Version ] (System version)
and [ Serial No. ] (Serial Number) appear on
the display.

FM Menu

For WS-803:
Can be operated only in [ FM Radio ]
mode.
Rec Mode
You can change the recording mode when
recording from the FM radio. Select a
recording mode to suit your purpose.
[ PCM ]:
The recording rate is automatically set to
[ 44.1kHz/16bit ].
[ MP3 ]:
The recording rate is automatically set to
[ 128kbps ].
[ WMA ]:
The recording rate is automatically set to
[ 128kbps ].
Auto-preset
Automatically adds receivable radio stations
to the presets.
See " Presetting radio stations
automatically [ Auto-preset ] " ( ☞ P.49).
Menu setting method
Scan Level
You can change the scan sensitivity when
scanning for radio stations with auto preset.
Select the sensitivity to suit the reception
conditions.
[ High ]:
Receive radio station signals using high
sensitivity. You should normally select
this setting.
[ Low ]:
Receive radio station signals using
reduced sensitivity. Try this setting when
signals from unwanted stations are
causing interference.
Output
You can change the audio output of the FM
radio.
[ Earphone ]:
Output sound from the earphones. Sound
is not output from the built-in speaker
even if you unplug the earphones.
[ Speaker ]:
Always output sound from the built-in
speaker. Sound is not output from the
earphones even if you plug them in.
• This is a different function from [ Speaker ]
in [ LCD/Sound Menu ]. Irrespective of
the [ Speaker ] setting, if you have set
[ Output ] to [ Speaker ] when listening to
the FM radio, sound from the radio is still
output from the speaker ( ☞ P.65).
5
EN
67