Olympus WS-801 Detailed Instructions page 37

Settings relating to playback
[ Voice Playback ] Only the voice portions
*1 *3 from a recorded audio file
( ☞ P.61)
are played back.
If recorded audio is difficult
to understand because of
[ Noise Cancel ] *3
noisy surroundings, adjust
( ☞ P.61)
the Noise Cancel setting
level.
When playing back a
[ Voice Balancer ] recorded audio file, the
*1 *3 recorder compensates for
( ☞ P.61)
any low-volume portions
in the file.
The recorder has a Voice
Filter Function to cut low
and high frequency tones
[ Voice Filter ] *2 *3
during normal, fast, or slow
( ☞ P.61)
playback, playback tone,
and enable clear audio
playback.
[ Play Mode ] You can select the
( ☞ P.62)
preferred playback mode.
When listening to music,
[ Equalizer ] *4 you can set your favorite
( ☞ P.62)
sound quality by adjusting
the equalizer setting.
[ Skip Space ]
The skip interval can be set.
( ☞ P.63)
Playback settings of your
[ Play Scene ] choice can be saved to suit
( ☞ P.63)
different sound qualities
and playback methods.
*1 WS-803, WS-802 only.
*2 WS-801 only.
*3 Function active only in [ Recorder ] mode.
*4 Function active only in [ Music ] mode.
Playback through the earphones
The earphones can be connected to the EAR
jack of the recorder for listening.
• When the earphones are used, the
recorder speaker is switched off.
To EAR jack
Notes
• To avoid hurting your ears, turn down the
volume before inserting the earphones
into your ears.
• When using the earphones, do NOT set
the volume too high. Listening at very
high volume may lead to hearing loss.
Playback
3
EN
37