Changing The Playback Sound - Olympus WS-801 Detailed Instructions

Changing the playback sound

You can change the playback speed and
tone * . Changing the playback speed is
useful when you want to speed-listen to
the contents of a lecture or slow down the
speed of a foreign-language phrase that you
couldn't catch.
* WS-803, WS-802 only.
1 While the recorder is in playback
mode, press the ` OK button.
2 Press the + or − button or the
9 or 0 button to make it
easier to catch what is being said.
9 , 0 buttons:
Change the playback speed.
+ , − buttons*:
Change the playback tone.
* WS-803, WS-802 only.
• If you are still having trouble catching
the words after changing the
playback speed, you can make the
voice clearer by changing the tone.
+ − button
` OK button
Press the ` OK button.
3
a
a Playback speed/ playback tone
indicator
• Even if playback is stopped, the
modified playback speed and tone
are retained.
Limits of fast playback
Normal operation may not be available
depending on the sampling frequency
and the bit rate of the file to be played
back. In such a case, reduce the speed
of fast playback.
Notes
• As in normal playback mode, you can
stop playback, cue a file, or insert an
index or temp mark in playback speed/
playback tone* modes as well ( ☞ P.42).
* WS-803, WS-802 only.
• When using the playback speed/ tone
function, the following functions are not
available.
• [ Voice Playback ] (WS-803, WS-802
only) ( ☞ P.61)
• [ Noise Cancel ] ( ☞ P.61)
Playback
3
EN
41