Summary of Contents for Step2 Vero Riser & Weight Retrofit Kit
Page 1
Vero Riser & Weight Retrofit Kit ™ Owner’s Manual Le Manuel du Propriétaire | El Manual del Propietario x2 | 1-3/4” (44.45 mm) x1 | 3/4” (19.05 mm) REQUIRED (Not Included) REQUIS (Non inclus) NECESARIO (No incluido) WARNING: MISE EN GARDE: ADVERTENCIA: DANGER D’ÉTOUFFEMENT CHOKING HAZARD...
Page 2
• After drilling is complete, discard templete and proceed with weight installation. • Une fois le perçage terminé, jetez le gabarit et procédez à l'installation du poids. • Una vez completada la perforación, deseche la plantilla y continúe con la instalación del peso. Fill with approximately 18 lbs (8.165 kgs) of sand.
Need help?
Do you have a question about the Vero Riser & Weight Retrofit Kit and is the answer not in the manual?
Questions and answers