Four Seasons Courtyard 258737 Assembly Instructions

IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPT
Step 1: Identify the parts packed in the carton against the parts list. Remove all protective materials and the set parts on a flat, non-abrasive surface.
Step 2: Attach the seat frame to the right leg by using a
the bolts through the holes in the seat frame
Step 3: After making any necessary adjustments to the alignment of the parts, use the hex bolt driver to tighten all bolts.
Over tightening may strip bolts. Cover all bolts with covers.
With the help of another person, turn the chair in the upright position. Your chair is now ready for use.
Step 4:
C
A
B
1/4"x25 mm bolt, two 1/4"x35 mm bolts and three washers as shown in the diagram. Guide
into the pre-drilled holes in the right leg.
F
E
G
FOOT CAP-2
FOOT CAP-1
Hand tighten only 2-3 turns. Repeat on the left leg.
Do not over tighten
G
D
F
Page 2
* NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE
PARTS LIST DESCRIPTION
.
A
SEAT FRAME
B
LEFT LEG
C
RIGHT LEG
D
1/4" X 25 MM BOLT
E
1/4" X 35 MM BOLT
Ø6.5 X 1.0 MM
F
WASHER
G BOLT COVER
H HEX BOLT DRIVER
FOOT CAP
FACTORY ASSEMBLY
FOOT CAP-2
FACTORY ASSEMBLY
SKU #258737(B2T00500H60)
ORDER PART # QTY
1
SK1568
1
SK1569
1
SK1570
2
HW0037
4
HW0142
6
HW0004
6
HW0105
1
HW0006
-1
FC0852
FC0763