D-Link DSL-522T User Manual page 9

DSL-522T ADSL Router User Guide
4. Click Finish to complete the InstallShield wizard.
When the USB driver has been installed, insert one end of the USB cable included with the router into the
DSL-522T router's USB port. Insert the other end of the USB cable into a USB port on your PC. Connect the
power adapter to the power input at the back panel of the DSL-522T and then plug the other end of the
power adapter to a wall outlet or power strip. On the front of the device, the Power LED will turn ON to
indicate proper operation. Insert the telephone cable included with the Router into the ADSL port, and then
connect the cable to your telephone line. Check the LED display on the front of the Router to confirm that the
connections have been made.
ix