Related Manuals for Dynamicnord TR-80
Summary of Contents for Dynamicnord TR-80
- Page 1 To download this user manual in additional languages please visit our website’s SERVICE-section – DYNAMICNORD.COM. TR-80 / IR-50 / CS-30 MANUAL REGULATORS...
- Page 2 WARNING This manual is no substitute for diving training! DYNAMICNORD diving equipment products may only be used by divers who have completed regular diving training conducted by a certified diving instructor. Using the diving equipment without a license or the necessary technical training can pose a risk to the diver's safety and even lead to death.
-
Page 3: Table Of Contents
For more information and the user manual in additional languages GENERAL INFORMATION BEFORE DIVING please visit our our website at DYNAMICNORD.COM. COMPONENTS OF A REGULATOR OUR REGULATORS Register your product on DYNAMICNORD.COM, to receive all warranty services. MARKING FIRST STAGES SECOND STAGES... -
Page 4: Introduction
DYNAMICNORD team to ensure that you have a comfortable and safe diving experi- This ensures conformity with PPE class 3. ence for years to come. Our DYNAMICNORD regulators are certified up to a depth of 50 m pursuant to the standard EN 250:2014 in accordance with EU Regulation 2016/425, which... -
Page 5: General Information Before Diving
DYNAMICNORD. This certificate must not be older than 2 years for persons under 40 years of age, and not •... -
Page 6: Components Of A Regulator
The instructions and directions in this manual are based on the latest equipment apparatus with an open circuit that includes a scuba tank. information available prior to printing. DYNAMICNORD reserves all rights to make The equipment must include at least the following items: changes at any time. -
Page 7: Our Regulators
OUR REGULATORS IR-50 With its compensated membrane, it allows deeper dives and more natural breathing. CS-30 Certified in waters below 10°C and suitable for depths below 30 m. This is our workhorse regulator for diving centers. Non-compensated piston. Known for its The adjustable venturi (dive/predive) is primarily designed to prevent unintentional free-flow design, reliability and robustness in its daily use at diving clubs. -
Page 8: Marking
The LP hose is tested for a maximum pressure of 34 bar. The mouthpiece is made of high- IR-50 and TR-80 end anti-allergic silicone for maximum comfort. The breathing effort of the TR-80's first and Regulators suitable for cold water are marked without °C specification. -
Page 9: First Stages
A1:2016 (max. operating pressure 232/300 bar) – consistent with the standard EN 250:2014. overview Number In addition, all DYNAMICNORD first stages are equipped with several pressure connections EXAMPLE: (threaded connections). These can be used to connect combinations of second stages,... - Page 10 OUR FIRST STAGES IN DETAIL: Adjustment knob for setting your personal inhalation comfort Exhaust valve and deflector offer minimal exhalation effort Piston-controlled first stage DIN / INT CS-30 The LP hose is tested for a maximum pressure of 34 bar Mouthpiece made of high-end silicone Connection: DIN 300 bar Average breathing effort for the complete regulator: 0,84 J/L...
- Page 11 For dives in cold waters (temperature <10°C), appropriate technical training is required. The LP hose is tested for a maximum pressure of 34 bar DYNAMICNORD recommends this type of diving only after completion of an appropri- The front cover is designed to prevent free-flow in strong currents ate course taught by a licensed diving instructor.
-
Page 12: Second Stages
It must not be slated for the dive itself! All DYNAMICNORD second stages have a bubble deflector. The venturi effect can be controlled and optimized by two operating positions. WHEN DIVING – marked with a "+" –... - Page 13 By choosing "-" the Venturi effect is reduced to prevent unintentional free-flow from the sec- Our mouthpiece is an DYNAMICNORD development and it made of anti-allergic silicone. It ond stage on land. Under water, the "+" position is used to increase the ensures a firm and comfortable fit inside the jaw and can be easily replaced in a few steps as Venturi effect and enable easy and comfortable inhalation.
- Page 14 Setting the response resistance (IR-50, TR-80): Compensated Second Stage (IR-50, TR-80): Every diver has their own perception of what is the "optimal" inhalation resistance. Using the The compensation of the second stage ensures that your inhalation comfort remains un- adjustment knob, everyone can find their own optimal setting and thus ensure maximum changed, regardless of the residual pressure in the tank.
- Page 15 This risk increases significantly when diving in cold water. DYNAMICNORD advises against the use of this configuration in cold water. If the octopus configuration is used by several divers at the same time, it should not be used in depth of more than 30 m or in water temperatures below 10 °C...
-
Page 16: Use And Risk Assessment
The diver's physical and mental condition, including health problems, emotional or For dives in cold water (temperatures below 10 °C/50 ° F), DYNAMICNORD recom- physical stress, lack of physical training, fatigue, active digestion after eating, etc., mends the use of a scuba tank valve with two independent connections to enable the must also be taken into consideration. - Page 17 WARNING Prevent water from entering directly into the first and second stages; Store the equipment in a dry place before diving Diving in cold water at water temperatures below 10 °C/50 °F requires special techni- Before diving, avoid breathing through the regulator and pressing the purge button if the cal training.
- Page 18 WARNING The performance of the SCUBA equipment may not meet the prescribed require- In accordance with the requirements of the standard EN 12021, DYNAMICNORD ments in cold water (standard EN 250:2014) when used by multiple divers simulta- regulators and octopuses can only be used with atmospheric compressed air in EEC neously.
- Page 19 Check the hoses for wear or cuts of any kind. If you find any damage, we recommend sively for use with nitrox tanks and valves. that you do not perform the dive – contact a DYNAMICNORD authorized center. Check both the first and the second stage for any signs of damage, e.g. check that the...
-
Page 20: Assembling The Regulator And The Scuba Tank
– because they are exposed to high tank pressure and weather effect. All regulators must be tested before being used in the water. Use only original spare parts by DYNAMICNORD! Press the purge button repeatedly to ensure sufficient fresh air flow. Breathe in and out a few times with the mouthpiece between your teeth to confirm proper operation (not before using in cold water below 10°... - Page 21 After loosening the locking screw of the INT connection, 10 °C/50 °F) DYNAMICNORD recommends this type of diving only after a special div- the protective cap must be removed from the guide and the first stage must be placed ing course with a certified instructor has been completed.
- Page 22 DYNAMICNORD recommends the use of DYNAMICNORD original products. The various If an additional regulator is used, connect it to the additional valve outlet as described elements of the DYNAMICNORD regulators are compatible with each other. Third-party above. products, on the other hand, are not necessarily compatible, even if they use the matching 3/8 or 7/16 threads.
-
Page 23: During Use
Deep diving requires specialized training and equipment and substantially increases left side of the second stage as much as possible (counterclockwise). Then turn the knob the risk of decompression illness and other diving-related diseases. DYNAMICNORD back (clockwise) until the regulator allows you to breathe comfortably without it appearing is not an advocate of dives deeper than 40 m (130 feet), nor of diving activities with overly sensitive. - Page 24 Dismounting the regulator from the tank valve (INT) Dismounting the regulator from the tank valve (DIN) Stop the air supply by turning the tank valve's handwheel clockwise as far as it will go. Turn the tank valve's handwheel clockwise as far as it will go to cut off the air supply. Watch the finimeter while pressing the purge button on the second stage.
-
Page 25: Care
CARE CAUTION! The manual purge button should not be pressed during this process After using the regulator, the tank valve must be closed. To do this, turn it clockwise, but do to prevent water from entering the hoses and the interior of the first stage. not overtighten it. -
Page 26: Maintenance
LP and HP caps of the first stage closed or with the connection (yoke or DIN) cap of the first stage to the tank Recommendation by DYNAMICNORD: The regulator should be serviced at least once closed. Do NOT disassemble the regulator! a year, no matter how often it has been used. - Page 27 Maintenance must be carried out by DYNAMICNORD authorized service centers using original spare parts. Failure to do so can result in high risks to the diver's health and even put their life in danger. DYNAMICNORD declines all responsibility for any maintenance and calibration of regulators performed by...
-
Page 28: Troubleshooting
2. Malfunction of the a DYNAMICNORD authorized checked by an DYNAMICNORD finimeter. technician. Have the valve of the authorized technician. 3. Malfunction of the compressed gas tank checked by... -
Page 29: Warranty
For repairs during the warranty period, please send the product The warranty is validated by a proof of purchase or an invoice and starts from the date of (free of charge) to your DYNAMICNORD dealer or to an authorized service center. Attach the purchase. The warranty does not cover: proof of purchase or invoice as well as your full name and shipping address. - Page 30 Your receipt may be required for warranty verification if you take your regulator to another DYNAMICNORD dealer for service. Location and service support: The dealer you purchased your regulator from can assist you with additional questions regarding product operation, warranty, and service.
- Page 31 Applied CE certification: Module B, according to regulation (EU)2016/426 Personal Protective Equipment (PPE), Reference numbers and designation: harmonized standard EN250:2014 CS-30, IR-50, TR-80, OP-30 Testing carried out by: Manufacturer: Vojenský technický ústav, Fifth Element GmbH, Pettenkoferstr. 12, 83052 Bruckmühl – Germany s.p.Mladoboleslavská...
- Page 32 Notified Body No. 2452 EU test certificate numbers: OOP-2452/EU-021/2023/40 Testing and certification body: Vojenský technický ústav, s.p.Mladoboleslavská 944 Kbely, 197 00 Praha 9, Czech Republic Notified Body No. 2452 Applied Standard: EN250:2014 Bruckmühl, September 20rd, 2023 For Fifth Element GmbH Martin Kusche (General Manager)
Need help?
Do you have a question about the TR-80 and is the answer not in the manual?
Questions and answers