One-Tap Pairing Via NFC
Flow Pro supports NFC pairing with NFC-enabled phones to quickly connect and start tracking
with DockKit.
*This feature is currently only supported on iOS.
If you are an iOS user, you can quickly connect your iPhone via NFC:
Power on Flow Pro.
1.
Unlock your phone and turn on Bluetooth.
2.
Touch your phone's NFC area to the gimbal, wait for the pop-up window, then tap Connect.
3.
Attach your phone to Flow Pro and wait until the head nods to indicate a successful
4.
connection. Do not remove the phone from the gimbal during the pop-up pairing process, as this
will result in pairing failure.
Once connected, you can control the phone's native camera or use it with a number of third-
5.
party apps, or connect to the Insta360 app.
○
To use Apple DockKit native camera tracking, turn on your iPhone's native camera and
switch to "Video" mode, point it at the subject, and tracking will turn on automatically.
○
When Flow Pro is tracking, the tracking ring light will be green and flash slowly. To stop
tracking, press the trigger button once. The tracking ring light will turn off. To start tracking again,
press the trigger button once. The tracking ring light will turn on to indicate that tracking has
resumed.
8
Flow Pro User Manual
Need help?
Do you have a question about the Flow Pro and is the answer not in the manual?