Crisper And Crisper Cover; Door Shelf Bottle Huggers - Haier HTE08WNA - 07-01 User Manual

hte10wna/hte08wna manual
English

Crisper and Crisper Cover

To remove and install the crisper: (see fig. # 7)
1. Grip the crisper firmly and slide out completely.
2. Replace the crisper by placing the crisper properly in position and
gently sliding it back into place.
Removing or replacing the crisper cover: (see fig. # 8)
1. Carefully grasp the crisper cover and slide out to remove.
2. To replace, slide the rear of the crisper cover into the right and left slots
above the crisper area and gently slide back into place.

Door Shelf Bottle Huggers

To adjust the door shelf bottle huggers: (see fig #9)
1. Grasp the hugger firmly and slide right or left until it is snug against the
items stored on the shelf.
11
10/22/01 11:49 AM Page 12
fig. # 7
shelf bottle hugger
fig. # 8
fig. # 9