Advertisement
Quick Links
Advertisement
Related Manuals for Rapesco G4-7 USB
Summary of Contents for Rapesco G4-7 USB
- Page 1 OPERATOR’S MANUAL G4-7 USB Cordless Hot Melt Glue Gun...
- Page 2 OPERATOR’S MANUAL MODE D’EMPLOI BENUTZER-HANDBUCH MANUAL DEL OPERADOR MANUALE OPERATIVO FIG. A...
- Page 3 FIG. B - BATTERY CHARGING FIG. C - LOADING GLUE STICKS FIG. D - WARNING...
- Page 4 4V Cordless Hot Melt Glue Gun H4-7 Model type G4-7 USB Input voltage 4VDC Tacwise Type H (7mm diameter) Glue stick type Rapesco Type H (7mm diameter) Glue stick length 150mm Heating time 60 seconds approx. Gluing capacity 2g/min Weight...
- Page 5 WARNING! Before use carefully read and understand all instructions. Failure to do so could result in electric shock, fire and/or serious personal injury. The term “power tool” in all of the warnings listed below refers to your battery-operated (cordless) Hot Melt Glue Gun. For any queries relating to safety matters on this power tool, please email service@tacwise.com.
-
Page 6: Electrical Safety
• Secure work. Use clamps or a vice to hold work. This frees both hands to operate the power tool. Personal Safety • Stay alert. Always watch what you are doing and use common sense. Do not operate a power tool when you are tired or under the influence of medication, alcohol or drugs. - Page 7 • Check for damaged parts. Check for misalignment or bending of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, immediately discontinue use and ensure the power tool is repaired before using again. Poorly maintained power tools can result in accidents.
- Page 8 • Do not activate the power tool unless it is in contact with the work piece. Serious injury can result from improper operation. • Fastening thin items. Special caution must be taken for adhering thin items, as this could cause possible harm/burn to anyone or anything behind the work piece or immediate area.
- Page 9 CE: Conforms with EC directives GS: Conforms with German Product Safety Act CUS: Conforms with UL and CSA standards Service Any servicing requires specialist tools and knowledge and should be performed only by our qualified service engineers or appointed service agent.
- Page 10 NOTE: Tool may feel warm during charging. NOTE: The battery is supplied partially charged. To ensure full capacity of the battery, completely charge the battery before using your power tool for the first time. The lithium-ion battery can be charged at any time without reducing its service life and reaches full capacity after its 5th charge/discharge cycle.
-
Page 11: Maintenance
NOTE: Always practice gluing on scrap work pieces before final gluing on projects. NOTE: Glue that has set on textiles cannot easily be removed. Warning (Fig. D) Never attempt to remove a glue stick from the back of the glue gun, as this may cause damage to the heating element of the power tool. - Page 12 When being transported by third parties (e.g. air transport or forwarding agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required. Dispatch batteries only when the housing is undamaged.
- Page 13 One-Year Free Servicing If your power tool requires maintenance or servicing in the 12 months following purchase, it will be undertaken free of charge by a our service engineers. Proof of purchase must be produced with an original receipt. This includes labour and spare parts for the tool. However in some cases the most economical option will likely be a replacement service exchange unit supplied by us.
- Page 14 04/19...
Need help?
Do you have a question about the G4-7 USB and is the answer not in the manual?
Questions and answers