Subscribe to Our Youtube Channel
Related Manuals for Kraus KWDA-200
Summary of Contents for Kraus KWDA-200
- Page 1 INSTALLATION MANUAL Air Switch KWDA-200 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2023 Kraus USA Plumbing LLC I REV. November 15. 2023...
- Page 2 If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit. For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:...
-
Page 3: Prior To Installation
• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. Pre-drilled hole size requirement: 1 3/8" (min) - 1 1/2" (max) •... -
Page 4: Specifications
6. Air Tube Nut x2 7. Air Tube 8. Mounting Screws & Anchors Specifications • KWDA-200** (single-channel control): Input: 125V ac, 60Hz, 3A max; Output: 125V ac, 60Hz, 3A max; • Working temperature: is -10~50C; • Working cycles are 100K;... -
Page 5: Installation And Use
[72mm] [47mm] [47mm] KWDA-200 Installation and Use Working principle: The first pushing on air button actuates the air switch and the air switch keeps actuating when air button is released . A second push on the air button will release the air switch. - Page 6 Step 1. Mount Push Button Air Control Mount the push button directly through a standard sink Push Button hole or drill a minimum 1 1/4" hole. Place the rubber gasket and metal washer between mounting nut and the bottom of the sink counter. Tighten the plastic nut under the sink counter to ensure a watertight seal.
-
Page 7: Step 3. Attach Air Tube
Step 3. Attach Air Tube Attach air tubing between the push button and power module. Make sure the two sides of the air tube have been connected. Tighten the air tube nut on the push button and power module until snug. - Page 8 Step 5. Connect Power Module and Disposer Plug the disposer cord in the power module. Press the push button to ensure that the Countertop Switch can turn the disposer on and off. Be sure that the control system is operating properly before using the unit. Disposer Cord Power...
-
Page 9: Replacement Parts
Replacement Parts Replacement Parts List Finish/Color Part # 1. Cover Assembly SFS* KP27425 2. Button Assembly SFS* KP27426 3. Rubber Washer KP27421 KP59003 4. Air Tube KP27422 5. Metal Washer KP27423 6. Mounting Nut KP27424 7. Air Tube Nut KP59008 8. - Page 10 (1) year from the date of purchase. Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.
- Page 11 TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
- Page 12 IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...
Need help?
Do you have a question about the KWDA-200 and is the answer not in the manual?
Questions and answers