Related Manuals for Gateway GW-EV500
Summary of Contents for Gateway GW-EV500
- Page 1 GW-EV500 Electric Vehicle AC Charger Installation Instructions Gateway International 360 • P.O. Box 518, Bear DE 19701 • 302.250.4990 • GatewayIntl360.com EV500-REV-02.16.24...
-
Page 2: Important Safety Instructions
PART I, RULE 4-012, IS TO BE DETERMINED BY THE LOCAL INSPECTION AUTHORITY HAVING JURISDICTION. 9) Risk of electric shock. Do not remove cover or attempt to open the enclosure. No user serviceable parts inside. Refer servicing to qualified service personnel. Gateway International 360 EV500-REV-02.16.24... - Page 3 To satisfy FCC RF exposure requirements, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Gateway International 360 EV500-REV-02.16.24...
-
Page 4: Basic Interface
2. Basic Interface LED Light Indication SAE J1772 AC Charging Connector Rear Notch AC Power Inlet Charging Cable Inlet LAN Cable Inlet Gateway International 360 EV500-REV-02.16.24... - Page 5 3. Dimensions 9.8″ 5.1″ 13.8″ 4-Φ0.35″ 4.8″ 2.83″ Gateway International 360 EV500-REV-02.16.24...
-
Page 6: Design Standard
UL 62: Flexible Cords and Cables UL 991: Tests for Safety-Related Controls Employing Solid-State Devices UL 1998: Software in Programmable Componets NFPA 70 Article 625: National Electrical Code, Electric Vehicle Charging System UL 840 (Clearance and Creepage) Gateway International 360 EV500-REV-02.16.24... - Page 7 USER MANUAL Gateway International 360 EV500-REV-02.16.24...
- Page 8 Charging - Green Light Flashing The CHARGE light flashes while CHARGE charging. Fault - Red Light The red light is lit while fault. Please FAULT refer to "9.3 Error and Warning Messages" for detailed information. Gateway International 360 EV500-REV-02.16.24...
-
Page 9: Packing List
7. Packing List Electric Vehicle AC Charger EVCA48S Series (NA) - User Manual Product Name Quantity Note AC Charger (With Charging Cable) User Manual Wall-Mounted Bracket M5 teeth screws M6 Hexagonal Expansion Screws RFID Card (RFID Version Only) Gateway International 360 EV500-REV-02.16.24... -
Page 10: Installation Instructions
• Type B, C or D breaker with the rating current for table should be installed in the upstream AC distribution box. • Disconnect switch for each ungrounded conductor of AC input shall be provided by others in accordance with the National Electric Code, ANSI/NFPA 70. Gateway International 360 EV500-REV-02.16.24... -
Page 11: Installation Steps
Step 1: Use screwdriver to loosen the 13 fixed screws on the rear of charger, then remove the front cover (for 4G Version). Step 2: Insert the SIM card according to the picture's instruction (for 4G Version).. Gateway International 360 EV500-REV-02.16.24... - Page 12 Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Gateway International 360 EV500-REV-02.16.24...
- Page 13 Connect the L1 lead to the grid L1, connect the L2 lead to the grid L2, connect the PE lead to the grid PE (for all Version). Circuit Breaker Options table Output Amperage (A) Circuit Breaker Options (A) Gateway International 360 EV500-REV-02.16.24...
-
Page 14: Tools And Materials Required
Installation Instructions “This device shall be mounted at a sufficient height from grade such that the height of the storage means for the coupling device is located between 600mm (24 inches) and 1.2m (4 feet) from grade.” Gateway International 360 EV500-REV-02.16.24... - Page 15 • Use 4 sets expansion screw and M6 screw to fix the wall-mounted bracket on the wall. Step 2: Align the rear notch of charger into the wall-mounted bracket and fit the screw holes of the right and left side. Gateway International 360 EV500-REV-02.16.24...
- Page 16 USER MANUAL Step 3: Fix two M5 screws to complete the installation. Overall outlook picture after installation: Wall-mounted cable winding Optional cable hanging(optional accessory) Gateway International 360 EV500-REV-02.16.24...
-
Page 17: Operating Procedures
Please plug the charging connector into the vehicle charging inlet. When you tap the RFID card first, it needs to complete the insertion of the charging connector within 120 seconds, otherwise you need to tap the RFID card again. Gateway International 360 EV500-REV-02.16.24... - Page 18 • If red light is still lit, please refer to "Error and Warning Messages". CHARGE Step 5 / Charging Finished When the charging is finished, the green light (CHARGE) is constantly lit, please press the button on connector. Gateway International 360 EV500-REV-02.16.24...
-
Page 19: Error And Warning Message
Contact Customer Service Relay Self-Test Fail Constantly Bright Contact Customer Service RCD Abnormal Stop Charging Constantly Bright Contact Customer Service Output OCP Stop Charging Constantly Bright Contact Customer Service OTP Stop Charging Constantly Bright Contact Customer Service Gateway International 360 EV500-REV-02.16.24... -
Page 20: Maintenance And Repair
Manual and Service Instruction (to be determined by certified maintenance technicians of Electron Charger), The product shall be repaired or replaced free of charge at Electron Char- ger's discretion excluding shipping costs. Except for the following situations, the charger shall be subject to the warranty terms below: Gateway International 360 EV500-REV-02.16.24... - Page 21 (including the implied warranties of merchant ability, particular and applicable reasonableness and adaptability, etc.) whether in the contract, civil negligence, or other aspects, Electron Charger shall not be responsible for any special, incidental or consequential damages. Gateway International 360 EV500-REV-02.16.24...
Need help?
Do you have a question about the GW-EV500 and is the answer not in the manual?
Questions and answers