Wen 10764 Instruction Manual

WARRANTY
WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this
commitment and our dedication to quality.
LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE
GREAT LAKES TECHNOLOGIES, LLC ("Seller") warrants to the original purchaser only, that all WEN consumer
power tools will be free from defects in material or workmanship during personal use for a period of two (2) years
from date of purchase or 500 hours of use; whichever comes first. Ninety days for all WEN products if the tool is
used for professional or commercial use. Purchaser has 30 days from the date of purchase to report missing or
damaged parts.
SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent
permitted by law, any warranty or condition implied by law, shall be the replacement of parts, without charge,
which are defective in material or workmanship and which have not been subjected to misuse, alteration, careless
handling, misrepair, abuse, neglect, normal wear and tear, improper maintenance, or other conditions adversely
affecting the Product or the component of the Product, whether by accident or intentionally, by persons other than
Seller. To make a claim under this Limited Warranty, you must make sure to keep a copy of your proof of purchase
that clearly defines the Date of Purchase (month and year) and the Place of Purchase. Place of Purchase must be a
direct vendor of Great Lakes Technologies, LLC. Purchasing through third party vendors, including but not limited
to garage sales, pawn shops, resale shops, or any other secondhand merchant, voids the warranty included with
this product. Contact techsupport@wenproducts.com or 1-847-429-9263 with the following information to make
arrangements: your shipping address, phone number, serial number, required part numbers, and proof of purchase.
Damaged or defective parts and products may need to be sent to WEN before the replacements can be shipped out.
Upon the confirmation of a WEN representative, your product may qualify for repairs and service work. When re-
turning a product for warranty service, the shipping charges must be prepaid by the purchaser. The product must
be shipped in its original container (or an equivalent), properly packed to withstand the hazards of shipment. The
product must be fully insured with a copy of the proof of purchase enclosed. There must also be a description of the
problem in order to help our repairs department diagnose and fix the issue. Repairs will be made and the product
will be returned and shipped back to the purchaser at no charge for addresses within the contiguous United States.
THIS LIMITED WARRANTY DOES NOT APPLY TO ITEMS THAT WEAR OUT FROM REGULAR USAGE OVER TIME,
INCLUDING BELTS, BRUSHES, BLADES, BATTERIES, ETC. ANY IMPLIED WARRANTIES SHALL BE LIMITED IN
DURATION TO TWO (2) YEARS FROM DATE OF PURCHASE. SOME STATES IN THE U.S. AND SOME CANADIAN
PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING
BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT.
SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY
TO COUNTRY.
THIS LIMITED WARRANTY APPLIES ONLY TO ITEMS SOLD WITHIN THE UNITED STATES OF AMERICA, CANADA
AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CON-
TACT THE WEN CUSTOMER SUPPORT LINE. FOR WARRANTY PARTS OR PRODUCTS REPAIRED UNDER WAR-
RANTY SHIPPING TO ADDRESSES OUTSIDE OF THE CONTIGUOUS UNITED STATES, ADDITIONAL SHIPPING
CHARGES MAY APPLY.
INSTRUCTION MANUAL
KNOW YOUR CALIPER
2
1 8
TO INSTALL THE BATTERY
Remove the battery tray from the back of the unit (you may need a small flat-head screwdriver). Set the included
battery in the tray, with the positive (+) side facing upward. Reinstall the battery tray.
SPECIFICATIONS
V. 2024.02.28
DIGITAL CALIPER
5 4 3 6
1. Step Measuring Face
2. Internal Jaws
3. LCD Display
4. Slider Locking Knob
5. Battery Tray (Back)
9 10 11 12
6. Scale
Model Number 10764
Measuring Range 0 - 150 mm / 0 - 6 Inches
Resolution 0.01 mm / 0.0005 in. / 1/128 in.
Power 1 x CR2032 3V Battery
Maximum Humidity Up to 80% Non-Condensing
Operating Temperature 0 - 40°C (32 - 104°F)
Storage Temperature -10 - 60°C (14 - 140°F)
IP Rating 67
MODEL 10764
IP54
7
7. Depth Measuring Tip
8. External Jaws
9. ON / OFF Button
10. Unit Selection Button
11. Zero Button
12. Slider Adjustment Knob