D-Link DI-524 Owner's Manual page 17

Using the Configuration Menu (continued)
Home > WAN > PPPoE continued
M a x i m u m
Idle Time-
MTU-
Auto-reconnect-
LAN is short for Local Area Network. This is considered your internal network. These are
the IP settings of the LAN interface for the DI-524. These settings may be referred to as
Private settings. You may change the LAN IP address if needed. The LAN IP address is
private to your internal network and cannot be seen on the Internet.
IP Address-
Subnet Mask-
Local Domain-
Enter a maximum idle time during which Internet connection is
maintained during inactivity. To diable this feature, enable Auto-
reconnect.
Maximum Transmission Unit-1492 is the default setting-you may
need to change the MTU for optimal performance with your
specific ISP.
If enabled, the DI-524 will automatically connect to your ISP af-
ter your system is restarted or if the PPPoE connection is dropped.
Home > LAN
The IP address of the LAN interface. The default IP address is:
192.168.0.1.
The subnet mask of the LAN interface.
The default subnet mask is 255.255.255.0.
This field is optional. Enter in the local domain name.
17