Denon AVR-990 Owner's Manual page 16

ENGLISH
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items
Audyssey Settings
(Continued)
Audyssey Dynamic Volume™ solves the problem of large variations in
volume level between television programs, commercials, and between
the soft and loud passages of movies.
Audyssey Dynamic EQ ® is integrated into Dynamic Volume so that
as the playback volume is adjusted automatically, the perceived bass
response, tonal balance, surround impression, and dialog clarity remain
the same.
Setting : Set "Dynamic Volume" equalizer effect.
• M idnight : High setting affects volume the most, causing all sounds to
be of equal loudness.
• E vening : Middle setting prevents loud and soft sounds from being
much louder and softer respectively than average sounds.
• D ay : Low setting provides the least adjustments to the loudest and
softest of sounds.
Can be set when "Dynamic Volume" is set to "ON".

Main remote control
operation buttons
Setting contents
Operation on the main remote control unit
Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF
"Green" "Red"
"Green" "Red"
About Dynamic Volume
:Displaying the menu
Cancel the menu
Setting items
DSX Soundstage
Adjust Audyssey DSX™
setting and sound stage
parameters.
:Moves the cursor
(Up/Down/Left/Right)
Setting contents
Audyssey DSX : Provides more immersive surround sound by adding the
new channels.
•
ON : Set Audyssey DSX to expand surround.
• OFF : Do not set Audyssey DSX.
Stage Width : Adjust sound stage width when using front wide speakers.
• –10 ~ 0
Stage Height : Adjust sound stage height when using front height speakers.
• –10 ~ 0
• " Audyssey DSX" can be set when you are using front height speakers
or front wide speakers.
• "Audyssey DSX" is only valid when using a center speaker.
• "Audyssey DSX" is valid when surround mode is STANDARD mode
other than PLgz Height.
[SPEAKERS]
• " Audyssey DSX" can be operated by
• "DSX Soundstage" cannot be configured if the HD Audio source being
played includes Front height and Front wide channels. In this case, the
respective channels are played back using the input signals.
About Audyssey Dynamic Surround Expansion (DSX)
Audyssey DSX™ is a scalable surround expansion system that adds
new channels to improve the surround impression. Based on research
in human hearing Audyssey DSX adds a pair of Wide channels in the
front because that information is critical in the rendering of a realistic
soundstage.
Audyssey DSX then adds a pair of Height channels above the main
front channels to reproduce the next most important acoustical and
perceptual cues related to soundstage depth. In addition to creating
these new channels, Audyssey DSX applies Surround Envelopment
Processing to enhance the blend between the front and side/back
surround channels. The result is a much more seamless and enveloping
home theater experience.
:Confirm the setting :Return to previous menu
.