Clean The Water Inlet Filters - Bosch WAU28S42ES User Manual And Assembly Instructions

en Cleaning and servicing
Reattach the water outlet hose and
5.
secure the connection point using
the hose clamp.

Clean the water inlet filters.

Clean the filter in the water inlet in
the event of blockages or if the water
pressure is too low.
Emptying the water inlet hose
Turn off the tap.
1.
Set the Algodón/Algodão
2.
gramme.
Start the programme and leave it
3.
to run for approx. 70 seconds.
Switch off the appliance.
4.
Disconnect the appliance's mains
5.
plug from the power supply.
48
All manuals and user guides at all-guidesbox.com
Cleaning the filter on the tap
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Requirement: The water inlet hose is
empty.
1.
2.
pro-
3.
Remove the water inlet hose from
the tap.
Clean the filter with a small brush.
Connect the water inlet hose and
check for leaks.