Subscribe to Our Youtube Channel
Related Manuals for Beijer Electronics GT-5442
Summary of Contents for Beijer Electronics GT-5442
- Page 1 User Manual GT-5442 PWM Output Module 2 ch, 24 VDC, 0.5 A, source, cage clamp, 18 pt removable terminal Doc ID: 131631 2024-07-13...
- Page 2 The information in this document is subject to change without notice and is provided as available at the time of printing. Beijer Electronics AB reserves the right to change any information without updating this publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this document.
-
Page 3: Table Of Contents
9. Hardware Setup ..................16 9.1. Space Requirements ................16 9.2. Mount Module to DIN Rail ..............18 9.3. Mount Removable Terminal Block ............. 21 9.4. Connect Cables to Removable Terminal Block ..........21 Beijer Electronics, Doc ID: 131631 2024-07... -
Page 5: About This Manual
About This Manual 1. About This Manual This manual contains information on the software and hardware features of the Beijer Electronics GT-5442 PWM Output Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product. 1.1. Symbols Used in This Manual This publication includes Warning, Caution, Note and Important icons where appropriate, to point out safety-related, or other important information. -
Page 6: Safety
Before using this product, please read this manual and other relevant manuals carefully. Pay full attention to safety instructions! In no event will Beijer Electronics be responsible or liable for damages resulting from the use of this product. The images, examples and diagrams in this manual are included for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Beijer Electronics cannot take responsibility or liability for actual use based on the examples and diagrams. -
Page 7: About The G-Series System
IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc. • Expansion Module - Expansion module types: Digital IO, Analog IO, and Special modules. • Messaging - The system uses two types of messaging: Service messaging and IO messaging. Beijer Electronics, Doc ID: 131631 2024-07... -
Page 8: Io Process Data Mapping
Valid parameter data depends on the modules in use. For example, analog modules have settings of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data. 2024-07 Beijer Electronics, Doc ID: 131631... -
Page 9: Specifications
Voltage range: 15-30 VDC Power dissipation: Max. 10 mA @ 24 VDC except load Single wire I/O Cable Max. 0.823mm² (AWG18) Weight 63 g Module size 12 mm x 109 mm x 70 mm Beijer Electronics, Doc ID: 131631 2024-07... -
Page 10: Output Specifications
Pulse output duty 0.0 - 100.0 % ±1.0 % (0.1 % / 1 LSB), Ton > 1 us, Toff > 1 us Protection Short protection Common type 2 common (field power 0 V is common) 2024-07 Beijer Electronics, Doc ID: 131631... -
Page 11: Wiring Diagram
PWM output channel #0 Field Power 0 V, common PWM output channel #1 Field Power 0 V, common Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Not connected Beijer Electronics, Doc ID: 131631 2024-07... - Page 12 Wiring Diagram Pin no. Signal description Not connected Not connected Not connected Shield Shield 2024-07 Beijer Electronics, Doc ID: 131631...
-
Page 13: Led Indicator
6. LED Indicator LED no. LED function / description LED color PMW output channel #0 Green PMW output channel #1 Green Channel Status Status Indicates No signal No output signal On signal Green Normal operation Beijer Electronics, Doc ID: 131631 2024-07... -
Page 14: Mapping Data Into The Image Value
Duty CH#1, low byte Byte 7 Duty CH#1, high byte NOTE Range of each Duty is 0 (0.0 %) - 1000 (100.0%). Ex. If Duty value is 365, then duty rate is 36.5 %. 2024-07 Beijer Electronics, Doc ID: 131631... -
Page 15: Parameter Data
Parameter Data 8. Parameter Data Valid parameter length: 2 Bytes Bit no. Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Byte 0 Reserved Byte 1 Reserved Beijer Electronics, Doc ID: 131631 2024-07... -
Page 16: Hardware Setup
Installation position is valid vertical and horizontal. The drawings are illustrative and may be out of proportion. CAUTION NOT following the space requirements may result in damaging the product. 2024-07 Beijer Electronics, Doc ID: 131631... - Page 17 Hardware Setup Beijer Electronics, Doc ID: 131631 2024-07...
-
Page 18: Mount Module To Din Rail
Hardware Setup 9.2. Mount Module to DIN Rail The following chapters describe how to mount the module to the DIN rail. CAUTION The module must be fixed to the DIN rail with the locking levers. 2024-07 Beijer Electronics, Doc ID: 131631... - Page 19 NOTE GN-9XXX modules have three locking levers, one at the bottom and two on the side. For mounting instructions, see the chapter Mount GN-9XXX Module below. Mount to DIN rail Dismount from DIN rail Beijer Electronics, Doc ID: 131631 2024-07...
- Page 20 9.2.2. Mount GN-9XXX Module To mount or dismount a network adapter or programmable IO module with the product name GN-9XXX, for example GN-9251 or GN-9371, see the following instructions: Mount to DIN rail Dismount from DIN rail 2024-07 Beijer Electronics, Doc ID: 131631...
-
Page 21: Mount Removable Terminal Block
To connect or disconnect cables to/from the removable terminal block (RTB), see the instructions below. WARNING Always use the recommended supply voltage and frequency to prevent damage to the equipment and ensure optimal performance. Beijer Electronics, Doc ID: 131631 2024-07... - Page 22 Hardware Setup Connect cable Disconnect cable 2024-07 Beijer Electronics, Doc ID: 131631...
Need help?
Do you have a question about the GT-5442 and is the answer not in the manual?
Questions and answers