Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BRIO CLPOU320SLUVF2
Summary of Contents for BRIO CLPOU320SLUVF2
- Page 1 Water Dispenser Setup Manual Model No.: CLPOU320SLUVF2...
-
Page 2: Table Of Contents
Table of Contents Safety Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3 Intended Use �... -
Page 3: Safety Information
Safety Information WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling, installing and operating the dispenser. WARNING: This product dispenses water at very high temperatures. Failure to use properly can cause personal injury. When operating this dispenser, always exercise basic safety precautions, including the following: Prior to use, this dispenser must be properly assembled and installed in accordance with this •... -
Page 4: Intended Use
Intended Use This dispenser is intended to be used in household and similar applications such as: • Staff kitchen areas, offices and other working environments • Farm houses • Clients in hotels, motels and other residential type environments • Bed and breakfast type environments •... -
Page 5: Indicator Panel Description
Indicator Panel Description 1� Power indicator light – When illuminated, indicates that the dispenser is on. 2� Hot water indicator light – When illuminated, indicates that the dispenser is heating water. 3� Cold water indicator light – When illuminated, indicates that the dispenser is cooling water. -
Page 6: Installation
Installation 1� Determine Installation Location A� Place the dispenser upright. B� Locate the dispenser on a hard and level surface in a cool shaded location near a grounded wall outlet. NOTICE: Do NOT plug in the power cord until the entire installation section is completed. -
Page 7: Flush The Filters
3� Flush the Filters IMPORTANT: Follow this procedure every time you replace your filters. IMPORTANT: Ensure the water supply is off before you begin. A� Connect a filter (D) to the filter housing (C) by twisting the filter (D) clockwise. B�... -
Page 8: Install The Filters And Complete The Installation
4� Install the Filters and Complete the Installation A� After flushing, twist each filter (D-E) clockwise into the filter housings located inside the dispenser cabinet. The sediment filter (D) goes on the left, followed by the carbon filter. B� Remove the safety plug from the water inlet hole on the back of the dispenser by pushing in the inlet hole collar and then gently pulling out the plug. -
Page 9: Operation
Operation IMPORTANT: This unit has been tested and sanitized prior to packing and shipping. During transit, dust and odors can accumulate in the tank and lines. Dispense and dispose at least one quart of water prior to drinking any water. Turn the Dispenser On/Off IMPORTANT: Before you activate the hot and cold switches, ensure water has filled the tanks inside the... -
Page 10: Troubleshooting
Troubleshooting Problem Solution • It takes up to one hour after setup to dispense cold water. • Make sure the power cord is properly connected to a working outlet. • Make sure the back of the dispenser is at least 20 cm from a wall and The cold water is not cold. -
Page 11: Clean The Dispenser
Clean the Dispenser CAUTION: Before cleaning, make sure the power switch is in the O (off) position and unplug the water dispenser. IMPORTANT: This dispenser contains UV technology that will help keep your dispenser clean. However, if you do need to clean your dispenser for any reason, follow these steps: 1�... -
Page 12: Filter Replacement Schedule
Filter Replacement Schedule Filter Type Replacement Schedule Function Carbon 6 months or 950 gallons Reduces chlorine, taste and odor, lead and cysts. Performs a coarse filtration of original water. Removes mud, sand, Sediment 6 months or 950 gallons iron, rust, suspensions and impurities. Replace the Filters IMPORTANT: Only replace the filters with new filters designed for this dispenser. -
Page 13: Warranty
Warranty Brio (“Vendor”) warrants to the original purchaser of the Brio Water Coolers (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in the Product shall be free from defects in material and workmanship. - Page 14 Contact Us Call: +1 844-257-4103 ©2020 DTWUSA...
Need help?
Do you have a question about the CLPOU320SLUVF2 and is the answer not in the manual?
Questions and answers